Free access
Issue
Ann. For. Sci.
Volume 57, Number 2, February 2000
Page(s) 165 - 179
DOI http://dx.doi.org/10.1051/forest:2000167

References

1
Bariska M., Collapse phenomena in Eucalypts, Wood Sci Tech. 26 (1992) 165-179.
2
Beauchêne J., Thibaut B., Influence of temperature on green mechanical properties of wood across the grain in relation to heating before veneer cutting, in: International COST 508 "Wood Mechanics" Conference, Stuttgart, Germany, May 14-16 (1996).
3
Botosso P.C., Une méthode de mesure du retrait microscopique du bois : application à la prédiction du retrait tangentiel d'éprouvettes de bois massif de Sapin pectiné (Abies alba Mill.), Thèse de l'Université Henry Poincaré - Nancy I (1997).
4
Demanet A., Caractérisation du comportement mécanique du chêne séché sous vide en vapeur d'eau surchauffée, DEA Sciences du Bois, Université Bordeaux I (1994).
5
Demanet A., Interactions mécaniques eau/bois et application à l'étude du collapse du Chêne, Thèse No. 1876, Université Bordeaux I (1998).
6
Demanet A., Morlier P., Joyet P., Drying of oak under vacuum with superheated steam Part II: Processes of damage during oak drying, in: Vacuum Drying of Wood '95, Zvolen, Slovak Republic, October 8-12 (1995).
7
François P., Plasticité du bois en compression multiaxiale. Application à l'absorption d'énergie mécanique, Thèse No. 813, Université Bordeaux I (1992).
8
Gibson L.J., Ashby M.F., Cellular Solids: Structure and Properties, Pergamon Press, 278-315 (1988).
9
Guilmain C., Jomaa W., Joyet P., Drying of oak under vacuum with superheated steam Part I: Heat and mass transfert modelling, in: Vacuum Drying of Wood '95, Zvolen, Slovak Republic, October 8-12 (1995).
10
Hart C.A., Relative humidity, EMC and collapse shrinkage in wood, For. Prod. Jour. 34 (1984) 45-54.
11
Joyet P., Meunier T., Drying green oak under vacuum with superheated steam without discoloration and drawback: industrial results, in: 5th International UFRO Wood Drying Conference: Quality wood drying through process modelling and novel technologies, (Quebec, Canada), August 13-17, 1996.
12
Larsen H.J., Gustafsson P.J., The fracture energy of wood in tension perpendicular to the grain, Results from a joint testing project, in: International Council for Building Research Studies and Documentation, 23th meeting, Lisbonne, Portugal (1990).
13
Mahé F., Résistance à la fissuration et contraintes de croissance, Application aux fentes d'abattage du peuplier I214, Thèse No. 1307, Université Bordeaux I (1995).
14
Pécheux E., Identification de la variable radiale des proportions intracernes d'éléments anatomiques chez le chêne (Quercus Robur L, Quercus Petraea Liebl) à partir d'une exploitation réaliste des profils microdensitométriques, DEA Sciences du Bois, Université de Nancy I (1993).
15
Schiffman R.L., The stress components of a porous medium, J. Geophys. Res. 75 (1970) 4035-4038.
16
Siau J.F., Wood: influence of moisture on physical properties, Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University Ed., 1995, pp. 75-85.
17
Valentin G., Adjanohoun G., Applicability of classical isotropic fracture mechanics specimens to wood crack propagation studies, Mater. Struct. 25 (1992) 3-13.

Abstract

Copyright INRA, EDP Sciences