Free access
Issue
Ann. For. Sci.
Volume 58, Number 6, August-September 2001
Page(s) 607 - 613
DOI http://dx.doi.org/10.1051/forest:2001148

References

1
Berti S., Brunetti M., Macchioni N., Basic properties of some hardwoods from arboriculture in Italy, in: Proceedings of Eurowood technical workshop, Industrial end uses of fast-grown species, IRL-CNR, Firenze, 1999, pp. 33-38.
2
Bordonne P.A., Module dynamique et frottement intérieur dans le bois mesurés sur poutres flottantes en vibrations naturelles, Wood Science thesis, Institut National Polytechnique de Lorraine, 1989, p. 110.
3
Ciancio O., Mercurio R., Nocentini S., Le specie forestali esotiche nella selvicoltura italiana, Annali dell'Istituto Sperimentale per la Selvicoltura, Vol. XII and XIII, pp. 143-205.
4
El Azzouzi K., Keller R., L'influence de la sylviculture sur quelques propriétés physiques du bois de cèdre d'Atlas (Cedrus atlantica Manetti), Ann. Rech. For. Maroc 27 (1994) 657-671.
5
El Azzouzi K., Keller R., Propriétés technologiques du bois de Cèdre de l'Atlas (Cedrus atlantica Manetti), Forêt Méditerranéenne XIX (1998) 11-33.
6
Ellatifi M., Le cèdre de l'Atlas hors de son aire naturelle: propriétés technologiques, Ann. Rech. For. Maroc 27 (1994) 683-697.
7
Quezel P., Biodiversité végétale des forêts méditerranéennes, son évolution éventuelle d'ici à trente ans, Forêt Méditerranéenne XX (1999) 3-8.
8
Varga-F., né-Foldi H., Some information on technical properties of exotic conifers, Acta Facultatis Lignensis, 1998, pp. 61-68.
9
V.V.A.A., Introduzione di nuove specie esotiche di legname da utilizzare sul mercato nazionale, I.S.E.A., Bologna, 1988.
10
EN 113, Determination of toxic values of wood preservatives against wood destroying basidiomycetes cultured on an agar medium.
11
EN 350-1, Durability of wood and wood-based products - Natural durability of solid wood - guide to the principles of testing and classification of the natural durability of wood.
10
ISO 3131, Wood - Determination of density for physical and mechanical tests.
11
ISO 3133, Wood - Determination of ultimate strength in static bending.
12
ISO 3347, Wood - Determination of ultimate shearing stress parallel to grain.
13
ISO 3787, Wood - Tests methods - Determination of ultimate stress in compression parallel to grain.
14
ISO 4469, Wood - Determination of radial and tangential shrinkage.
15
ISO 4858, Wood - Determination of volumetric shrinkage.

Abstract

Copyright INRA, EDP Sciences