Free access
Note
Issue
Ann. For. Sci.
Volume 61, Number 7, October-November 2004
Page(s) 731 - 736
DOI http://dx.doi.org/10.1051/forest:2004070
References of Ann. For. Sci. 61 731-736
  1. Axelsson B.O.M., Grundberg S.A., Gronlund J.A., Tool wear when planning and milling, Measurement methodology and influencing factors, in: Proceedings of the 11th International Wood Machining Seminar, 1993, pp. 159-176.
  2. Costes J.P., Larricq P., Towards high cutting speed in wood milling, Ann. For. Sci. 59 (2002) 857-865 [EDP Sciences] [CrossRef].
  3. Darmawan W., Tanaka C., Usuki H., Ohtani T., Wear characteristics of some coated carbide tools when machining hardboard and wood-chip cement board, J. Wood Ind. 55 (2000) 456-460.
  4. Darmawan W., Tanaka C., Usuki H., Ohtani T., Performance of coated carbide tools in grooving wood-based materials: Effect of coating materials and work material on the wear resistance of coated carbide tools, J. Wood Sci. 47 (2001) 94-101.
  5. Darmawan W., Tanaka C., Usuki H., Ohtani T., Performance of coated carbide tools in turning wood-based materials: Effect of coating materials and cutting speeds on the wear characteristics of coated carbide tools in turning wood-chip cemenboard, J. Wood Sci. 47 (2001) 342-349 [CrossRef].
  6. Eyma F., Meausoone P.J., Martin P., Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in modes B, Ann. For. Sci. 61 (2004) 55-64 [EDP Sciences] [CrossRef].
  7. Fujii Y., Fuketa T., Arashi Y., Okumura S., Noguchi M., Pattern recognition of cutting sound from woodworking tools and its application to the in-process monitoring of wear, in: Proceedings of the 11th International Wood Machining Seminar, 1993, pp. 147-156.
  8. Lemaster R., Tee L., Monitoring tool wear during wood machining with acoustic emission, Wear 101 (1985) 273-282 [CrossRef].
  9. Ulsoy A.G., Mote C.D. Jr, Vibration of wide band saw blades, J. Engin. Ind. Trans. ASME 104 (1982) 71-78.
  10. Piotr I., Tanaka C., Energy Balance during orthogonal machining of medium density fiberboard, in: Proceedings of the 16th International Wood Machining Seminar, 2003, pp. 459-467.
  11. Sokojowski W., Gogolewski P., Temperature of machined surface as value for tool condition monitoring during wood products milling, in: Proceedings of the 14th International Wood Machining Seminar, 1999, pp. 775-780.
  12. Tanaka C., Nakao T., Nishino Y., Hamaguchi T., Takahashi A., Detection of wear degree of cutting tool by acoustic emission signal, Mokuzai Gakkaishi 38 (1992) 841-846.
  13. Tanaka C., Takahashi A., Shiota Y., Cutting performance of cermet, ceramic, CBN and artificial diamond. I. Wear from continuous cutting of wood-based materials, Mokuzai Gakkaishi 32 (1986) 96-102.
  14. Tanaka C., Takahashi A., Date H., Nakao T., Cutting performance of cermet, ceramic, CBN and artificial diamond. III. Cutting performance of ceramic tools, Mokuzai Gakkaishi 34 (1986) 298-304.
  15. Ying-jie Q., Zhao-hao Z., Xiao-jie Q., Shou-qian C., Li Z., Noise measuring and analysis study of precision panel saw, in: Proceedings of the 16th International Wood Machining Seminar, 2003, pp. 696-701.