Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

An original impact device for biomass characterisation: results obtained for spruce and poplar at different moisture contents

Floran Pierre, Giana Almeida, Françoise Huber, Philippe Jacquin and Patrick Perré
Wood Science and Technology 47 (3) 537 (2013)
DOI: 10.1007/s00226-012-0512-9
See this article

Influence of anatomy and basic density on specific cutting force for wood from Corymbia citriodora Hill & Johnson

Luiz-E. De L. Melo, José-R. M. da Silva, Alfredo Napoli, José-T. Lima and Débora-F. R. Nascimento
Forest Systems 24 (3) e036 (2015)
DOI: 10.5424/fs/2015243-07712
See this article

Analysis of chip formation mechanisms and modelling of slabber process

Renaud Pfeiffer, Robert Collet, Louis Etienne Denaud and Guillaume Fromentin
Wood Science and Technology 49 (1) 41 (2015)
DOI: 10.1007/s00226-014-0680-x
See this article

Tool Temperature and Cutting Forces during the Machining of Particleboard and Solid Wood

J. Ratnasinga, T. Pew Ma and G. Ramasamy
Journal of Applied Sciences 10 (22) 2881 (2010)
DOI: 10.3923/jas.2010.2881.2886
See this article

Wood Machining

Wood Machining 27 (2013)
DOI: 10.1002/9781118602713.ch2
See this article

A review on wood machining: characterization, optimization, and monitoring of the sawing process

Vahid Nasir and Julie Cool
Wood Material Science & Engineering 1 (2018)
DOI: 10.1080/17480272.2018.1465465
See this article

Proceedings of the Third International Symposium on Materials and Sustainable Development

Bourab Fatma-zohra, Aknouche Hamid and Hamrani Abderrachid
Proceedings of the Third International Symposium on Materials and Sustainable Development 620 (2018)
DOI: 10.1007/978-3-319-89707-3_66
See this article

A Possible Correlation Investigation between Young's Modulus and Thermal Properties of Green Composites

Mourad Chikhi, Boudjemaa Agoudjil and Fatiha Mokhtari
Materials Science Forum 895 52 (2017)
DOI: 10.4028/www.scientific.net/MSF.895.52
See this article

The effect of rotation speed on the power consumption and cutting accuracy of guided circular saw: Experimental measurement and analysis of saw critical and flutter speeds

Vahid Nasir, Ahmad Mohammadpanah and Julie Cool
Wood Material Science & Engineering 1 (2018)
DOI: 10.1080/17480272.2018.1508167
See this article

Online control of wood peeling process: Acoustical and vibratory measurements of lathe checks frequency

Louis Étienne Denaud, Laurent Bléron, Alain Ratle and Rémy Marchal
Annals of Forest Science 64 (5) 569 (2007)
DOI: 10.1051/forest:2007034
See this article

Up-milling and down-milling wood with different grain orientations – the cutting forces behaviour

Giacomo Goli, Marco Fioravanti, Rémy Marchal, Luca Uzielli and Simone Busoni
European Journal of Wood and Wood Products 68 (4) 385 (2010)
DOI: 10.1007/s00107-009-0374-5
See this article

Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood

Vahid Nasir and Julie Cool
European Journal of Wood and Wood Products 77 (4) 609 (2019)
DOI: 10.1007/s00107-019-01412-z
See this article