Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Research on the Wood Density Measurement in Standing Trees through the Micro Drilling Resistance Method

Jianfeng Yao, Yabin Zhao, Jun Lu, Hengyuan Liu, Zhenyang Wu, Xinyu Song and Zhuofan Li
Forests 15 (1) 175 (2024)

The effect of growth-ring orientation on the compressive performance of Douglas fir

Wanzhao Li, Kai Yang, Ye Zhang, Jiangtao Shi, Jan Van den Buckle and Joris Van Acker
Wood Material Science & Engineering 19 (1) 131 (2024)

Characterisation of bacterial decay effects on wooden foundation piles across various historical periods

Michele Mirra, Giorgio Pagella, Michael Lee, Wolfgang Gard, Geert Ravenshorst and Jan-Willem van de Kuilen
Construction and Building Materials 421 135670 (2024)

Wood and plywood as eco-materials for sustainable mobility: A review

B. Castanié, A. Peignon, C. Marc, F. Eyma, A. Cantarel, J. Serra, R. Curti, H. Hadiji, L. Denaud, S. Girardon and B. Marcon
Composite Structures 329 117790 (2024)

Thermo-migration of moisture in Norway spruce assessed by in-situ micro-tomography

Benoît Martin, Julien Colin, Joel Casalinho, Patrick Perré and Romain Rémond
Construction and Building Materials 404 133209 (2023)

A method for estimating tree ring density by coupling CT scanning and ring width measurements: application to the analysis of the ring width–ring density relationship in Picea abies trees

Tojo Ravoajanahary, Frédéric Mothe and Fleur Longuetaud
Trees 37 (3) 653 (2023)

Biomechanical modeling of rice seedling stalk based on multi-scale structure and heterogeneous materials

Kang Xue, Kejie Gao, Tingjue Wang, Xiaoshuang Zhang, Shun Zhang, Fuming Kuang and Dequan Zhu
Computers and Electronics in Agriculture 210 107904 (2023)

Improving stem quality assessment based on national forest inventory data: an approach applied to Spanish forests

Antonio Ruano, Iciar Alberdi, Patricia Adame, Daniel Moreno-Fernández, Alejandro Cantero Amiano, Juan Fernández-Golfín, Eva Hermoso, Laura Hernández, Esther Merlo, Vicente Sandoval and Isabel Cañellas
Annals of Forest Science 80 (1) (2023)

Impact of Intensive Forest Management Practices on Wood Quality from Conifers: Literature Review and Reflection on Future Challenges

Julie Barrette, Alexis Achim and David Auty
Current Forestry Reports 9 (2) 101 (2023)

Fomes fomentarius and F. inzengae—A Comparison of Their Decay Patterns on Beech Wood

Valentino Cristini, Patrik Nop, Jan Zlámal, Mojtaba Hassan Vand, Vít Šeda and Jan Tippner
Microorganisms 11 (3) 679 (2023)

Traceability and quality assessment of Norway spruce (Picea abies (L.) H.Karst.) logs: the TreeTrace_spruce database

Fleur Longuetaud, Rudolf Schraml, Frédéric Mothe, Tojo Ravoajanahary, Rémi Decelle, Thiéry Constant, Phuc Ngo, Isabelle Debled-Rennesson, Karl Entacher, Alexander Petutschnigg, Franka Brüchert and Andreas Uhl
Annals of Forest Science 80 (1) (2023)

Moisture gradients in sawn timber during aggressive kiln drying investigated with X-ray computed tomography

Boris Poupet, Sara Florisson, José Couceiro and Dick Sandberg
Wood Material Science & Engineering 18 (6) 2140 (2023)

Quantifying avian inertial properties using calibrated computed tomography

Nicholas E. Durston, Yusuf Mahadik and Shane P. Windsor
Journal of Experimental Biology 225 (1) (2022)

Removing harvest residues from hardwood stands affects tree growth, wood density and stem wood nutrient concentration in European beech (Fagus sylvatica) and oak (Quercus spp.)

Sanjoy Roy, Jean-Michel Leban, Bernhard Zeller, Gregory van der Heijden, Arnaud Reichard, Marie-Christine Gehin, Philippe Santenoise and Laurent Saint-Andre
Forest Ecosystems 9 100014 (2022)

Quantifying wood decomposition by insects and fungi using computed tomography scanning and machine learning

Sebastian Seibold, Jörg Müller, Sebastian Allner, Marian Willner, Petr Baldrian, Michael D. Ulyshen, Roland Brandl, Claus Bässler, Jonas Hagge and Oliver Mitesser
Scientific Reports 12 (1) (2022)

Degradation of beech wood by Kretzschmaria deusta: its heterogeneity and influence on dynamic and static bending properties

Valentino Cristini, Jan Tippner, Patrik Nop, Jan Zlámal, Mojtaba Hassan Vand and Vít Šeda
Holzforschung 76 (9) 813 (2022)

Traceability and quality assessment of Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) logs: the TreeTrace_Douglas database

Fleur Longuetaud, Guillaume Pot, Frédéric Mothe, Alexis Barthelemy, Rémi Decelle, Florian Delconte, Xihe Ge, Grégoire Guillaume, Théo Mancini, Tojo Ravoajanahary, Jean-Claude Butaud, Robert Collet, Isabelle Debled-Rennesson, Bertrand Marcon, Phuc Ngo, Benjamin Roux and Joffrey Viguier
Annals of Forest Science 79 (1) (2022)

Predicting Douglas-fir knot size in the stand: a random forest model based on CT and field measurements

Bruna L. Longo, Franka Brüchert, Gero Becker and Udo H. Sauter
Wood Science and Technology 56 (2) 531 (2022)

Vertical variations in wood basic density for two softwood species

Antoine Billard, Rodolphe Bauer, Frédéric Mothe, Francis Colin, Christine Deleuze and Fleur Longuetaud
European Journal of Forest Research 140 (6) 1401 (2021)

Identifying Efficient Transport Pathways in Early-Wood Timber: Insights from 3D X-ray CT Imaging of Softwood in the Presence of Flow

H. C. Burridge, R. Pini, S. M. K. Shah, et al.
Transport in Porous Media 136 (3) 813 (2021)

Using X-ray CT Scanned Reconstructed Logs to Predict Knot Characteristics and Tree Value

Airu Ji, Julie Cool and Isabelle Duchesne
Forests 12 (6) 720 (2021)

Artificial neural network for defect detection in CT images of wood

Ligong Pan, Rodion Rogulin and Sergey Kondrashev
Computers and Electronics in Agriculture 187 106312 (2021)

Application of Industrial Computer Tomography to Determine Wood Porosity

Eva Buranská, Peter Rantuch, Ivan Buranský and Alexandra Kucmanová
Research Papers Faculty of Materials Science and Technology Slovak University of Technology 29 (49) 15 (2021)

Predicting Density and Moisture Content of Populus xiangchengensis and Phyllostachys edulis using the X-Ray Computed Tomography Technique

Qingping Wang, Xing'e Liu and Shumin Yang
Forest Products Journal 70 (2) 193 (2020)

Improving aboveground biomass estimates by taking into account density variations between tree components

Antoine Billard, Rodolphe Bauer, Frédéric Mothe, Mathieu Jonard, Francis Colin and Fleur Longuetaud
Annals of Forest Science 77 (4) (2020)

Mapping spatially distributed material properties in finite element models of plant tissue using computed tomography

Christopher J. Stubbs, Ryan Larson and Douglas D. Cook
Biosystems Engineering 200 391 (2020)

La tomodensitométrie en archéologie

Geneviève Treyvaud, Pierre Francus and Mathieu Des Roches
Les Nouvelles de l'archéologie (159) 68 (2020)

CarDen: A software for fast measurement of wood density on increment cores by CT scanning

Philippe Jacquin, Frédéric Mothe, Fleur Longuetaud, et al.
Computers and Electronics in Agriculture 156 606 (2019)

Computed tomography log scanning – high technology for forestry and forest based industry

Tomáš Gergeľ, Tomáš Bucha, Miloš Gejdoš and Zuzana Vyhnáliková
Central European Forestry Journal 65 (1) 51 (2019)

Validation of a CT knot detection algorithm on fresh Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) logs

Bruna L. Longo, Franka Brüchert, Gero Becker and Udo H. Sauter
Annals of Forest Science 76 (2) (2019)

Applications of computed tomography (CT) scanning technology in forest research: a timely update and review

Jean Beaulieu and Pierre Dutilleul
Canadian Journal of Forest Research 49 (10) 1173 (2019)

Non-destructive detection of density and moisture content of heartwood and sapwood based on X-ray computed tomography (X-CT) technology

Qingping Wang, Xing’e Liu, Shumin Yang, Mingliang Jiang and Jinzhen Cao
European Journal of Wood and Wood Products 77 (6) 1053 (2019)

Computed tomography (CT) scanning of internal log attributes prior to sawing increases lumber value in white spruce (Picea glauca) and jack pine (Pinus banksiana)

Denis Belley, Isabelle Duchesne, Steve Vallerand, Julie Barrette and Michel Beaudoin
Canadian Journal of Forest Research 49 (12) 1516 (2019)

Isolating phyllotactic patterns embedded in the secondary growth of sweet cherry (Prunus avium L.) using magnetic resonance imaging

Mitchell Eithun, James Larson, Gregory Lang, Daniel H. Chitwood and Elizabeth Munch
Plant Methods 15 (1) (2019)

Density and density profile changes in birch and spruce caused by thermo-hydro treatment measured by X-ray computed tomography

Vladimirs Biziks, Joris Van Acker, Holger Militz, Juris Grinins and Jan Van den Bulcke
Wood Science and Technology 53 (2) 491 (2019)

Non-Destructive Evaluation Techniques and What They Tell Us about Wood Property Variation

Laurence Schimleck, Joseph Dahlen, Luis A. Apiolaza, Geoff Downes, Grant Emms, Robert Evans, John Moore, Luc Pâques, Jan Van den Bulcke and Xiping Wang
Forests 10 (9) 728 (2019)

Investigating wood under thermo-hydromechanical loading at the ring scale using full-field measurements

D. Dang, R. Moutou Pitti, E. Toussaint and M. Grédiac
Wood Science and Technology 52 (6) 1473 (2018)

Effect of tree spacing on growth and wood density of 38-year-old Cariniana legalis trees in Brazil

Ivanka Rosada de Oliveira, Matheus Peres Chagas, Jean-Pierre Bouillet, et al.
Southern Forests: a Journal of Forest Science 80 (4) 311 (2018)

Relations of density, polyethylene glycol treatment and moisture content with stiffness properties of Vasa oak samples

Alexey Vorobyev, Gunnar Almkvist, Nico P. van Dijk and E. Kristofer Gamstedt
Holzforschung 71 (4) 327 (2017)

X-ray microdensitometry of wood: A review of existing principles and devices

Philippe Jacquin, Fleur Longuetaud, Jean-Michel Leban and Frédéric Mothe
Dendrochronologia 42 42 (2017)

Within-stem maps of wood density and water content for characterization of species: a case study on three hardwood and two softwood species

Fleur Longuetaud, Frédéric Mothe, Meriem Fournier, Jana Dlouha, Philippe Santenoise and Christine Deleuze
Annals of Forest Science 73 (3) 601 (2016)

Variations in the natural density of European oak wood affect thermal degradation during thermal modification

Joël Hamada, Anélie Pétrissans, Frédéric Mothe, Julien Ruelle, Mathieu Pétrissans and Philippe Gérardin
Annals of Forest Science 73 (2) 277 (2016)

Estimating the density of coast Douglas-fir wood samples at different moisture contents using medical X-ray computed tomography

Nathaniel L. Osborne, Ølav A. Høibø and Douglas A. Maguire
Computers and Electronics in Agriculture 127 50 (2016)

XRCT images and variograms reveal 3D changes in wood density of riparian trees affected by floods

Juan Antonio Ballesteros-Cánovas, Markus Stoffel and Carolina Guardiola-Albert
Trees 29 (4) 1115 (2015)

Nano X-ray tomography analysis of the cell-wall density of welded beech joints

Mojgan Vaziri, Anton Du Plessis, Dick Sandberg and Sven Berg
Wood Material Science & Engineering 10 (4) 368 (2015)

How to Improve Dendrogeomorphic Sampling: Variogram Analyses of Wood Density Using X-Ray Computed Tomography

Carolina Guardiola-Albert, J. A. Ballesteros-Cánovas, M. Stoffel and A. Díez-Herrero
Tree-Ring Research 71 (1) 25 (2015)

Density distribution profile for internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning

Puxi Huang, Wen-Shao Chang, Martin P. Ansell, Y.M. John Chew and Andy Shea
Construction and Building Materials 93 197 (2015)

A high-throughput X-ray-based method for measurements of relative wood density from unprepared increment cores from Picea abies

Arne Steffenrem, Harald Kvaalen, Knut Sigmund Dalen and Olav A. Høibø
Scandinavian Journal of Forest Research 29 (5) 506 (2014)

Can the impulse propagation speed from cross-section tomography explain the conditioned density of wood?

Luciana Cavalcante Pereira-Rollo, Demóstenes Ferreira da Silva Filho, Mario Tomazello Filho, Sergio de Oliveira Moraes and Hilton Thadeu Zarate do Couto
Wood Science and Technology 48 (4) 689 (2014)

An Investigation of Moisture Gradient in Wood during Drying Using X-Ray Radiation and Numeric Methods

Le Yu, Xiaofeng Hao, Liping Cai, et al.
Forest Products Journal 64 (5-6) 199 (2014)

How do trees grow? Response from the graphical and quantitative analyses of computed tomography scanning data collected on stem sections

Pierre Dutilleul, Li Wen Han and Jean Beaulieu
Comptes Rendus. Biologies 337 (6) 391 (2014)

Density mapping of decaying wood using X-ray computed tomography

Vincent Hervé, Frédéric Mothe, Charline Freyburger, Eric Gelhaye and Pascale Frey-Klett
International Biodeterioration & Biodegradation 86 358 (2014)

Computed tomography study of snuff trays from San Pedro de Atacama (Northern Chile)

Hermann M. Niemeyer, Víctor Zapata, Paulina Cantillana, Alejandra Missene, José Aguilera and Arturo Torres
Journal of Archaeological Science 40 (4) 2036 (2013)

Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images

Sergio J. Sanabria, Ulrich Hilbers, Jürg Neuenschwander, et al.
Ultrasonics 53 (1) 157 (2013)

Quantitative Determination of Density and Mass of Polymeric Materials Using Microfocus Computed Tomography

A. Plessis, M. Meincken and T. Seifert
Journal of Nondestructive Evaluation 32 (4) 413 (2013)

A multidimensional statistical model for wood data analysis, with density estimated from CT scanning data as an example

Ameur M. Manceur, Jean Beaulieu, Liwen Han and Pierre Dutilleul
Canadian Journal of Forest Research 42 (6) 1038 (2012)

Automatic knot detection and measurements from X-ray CT images of wood: A review and validation of an improved algorithm on softwood samples

F. Longuetaud, F. Mothe, B. Kerautret, et al.
Computers and Electronics in Agriculture 85 77 (2012)

PithExtract: A robust algorithm for pith detection in computer tomography images of wood – Application to 125 logs from 17 tree species

H. Boukadida, F. Longuetaud, F. Colin, et al.
Computers and Electronics in Agriculture 85 90 (2012)

Assessment of standing wood and fiber quality using ground and airborne laser scanning: A review

Martin van Leeuwen, Thomas Hilker, Nicholas C. Coops, et al.
Forest Ecology and Management 261 (9) 1467 (2011)

Physical and mechanical wood properties of 14 timber species from Northeast Mexico

Artemio Carrillo, Miriam Garza, María de Jesús Nañez, Fortunato Garza, Rahim Foroughbakhch and Sadoth Sandoval
Annals of Forest Science 68 (4) 675 (2011)

On the use of X-ray computed tomography for determining wood properties: a review1This article is a contribution to the series The Role of Sensors in the New Forest Products Industry and Bioeconomy.

Qiang Wei, Brigitte Leblon and Armand La Rocque
Canadian Journal of Forest Research 41 (11) 2120 (2011)

Tracking rameal traces in sessile oak trunks with X-ray computer tomography: biological bases, preliminary results and perspectives

Francis Colin, Frédéric Mothe, Charline Freyburger, et al.
Trees 24 (5) 953 (2010)

Decreasing trend and fluctuations in the mean ring density of Norway spruce through the twentieth century

Tony Franceschini, Jean-Daniel Bontemps, Pierre Gelhaye, Daniel Rittie, Jean-Christophe Herve, Jean-Claude Gegout and Jean-Michel Leban
Annals of Forest Science 67 (8) 816 (2010)

High-resolution proxies for wood density variations in Terminalia superba

M. De Ridder, J. Van den Bulcke, D. Vansteenkiste, et al.
Annals of Botany 107 (2) 293 (2010)