Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents
Ann. For. Sci., 64 7 (2007) 679-690
Published online: 2007-10-11
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Influence of drying methods before thermal modification on the mechanical properties of oak sawn timber
Changjin LeeWood Material Science & Engineering 1 (2026)
https://doi.org/10.1080/17480272.2025.2602701
Assessment of the Impact Strength Properties of Thermally Modified Wood by Non-Destructive Testing
Mojtaba Hassan Vand, Patrik Nop and Jan TippnerJournal of Nondestructive Evaluation 45 (1) (2026)
https://doi.org/10.1007/s10921-025-01313-7
Dimensional stability of heat-treated wood: effects of hygroscopicity and hygro-deformation sensitivity in earlywood and latewood
Wendi Wang, Tao Shi, Luyao Chen, Hui Peng, Jianxiong Lyu and Tianyi ZhanWood Science and Technology 60 (1) (2026)
https://doi.org/10.1007/s00226-025-01743-6
Influence of polyethylene glycol and various carboxylic acids on the physical and mechanical properties of beech wood ( Fagus sylvatica ) and Scots pine wood ( Pinus sylvestris )
Melissa Christ, Nicole Flaig and Marcus MüllerWood Material Science & Engineering 20 (2) 361 (2025)
https://doi.org/10.1080/17480272.2024.2350691
Mass loss in Schizolobium parahyba var. amazonicum splints subjected to heat treatment
Maria Gabriela Sales da Silva, Jéssica Alencar de Souza, Gabriel Cruz Menezes, Ruan Lima Sousa, Marco Antonio Siviero, Sabrina Benmuyal Vieira and João Miguel Santos DiasCaderno Pedagógico 22 (8) e16905 (2025)
https://doi.org/10.54033/cadpedv22n8-021
Improving the Physical Characteristics and Durability of Wood Through a Combined Modification Process Using Thermal Treatment and Wax Impregnation in One Step
Miklós BakForests 16 (8) 1317 (2025)
https://doi.org/10.3390/f16081317
Evaluation of the critical energy release rate of Chilean Pinus Radiata D. Don in mode I DCB test subjected to thermal treatment
Felipe Núñez, Ignacio Olivares and Rodrigo ValleTheoretical and Applied Fracture Mechanics 139 105035 (2025)
https://doi.org/10.1016/j.tafmec.2025.105035
101 (2025)
https://doi.org/10.1007/978-3-031-38329-8_3
Fluorination to Convert the Surface of Lignocellulosic Materials from Hydrophilic to Hydrophobic
Alexandre Dumontel, Olivier Téraube, Tomy Falcon, Angélique Bousquet, Eric Tomasella, Monica Francesca Pucci, Pierre-Jacques Liotier, Yasser Ahmad, Karine Charlet and Marc DuboisSurfaces 9 (1) 3 (2025)
https://doi.org/10.3390/surfaces9010003
A review on the role of thermogravimetric analysis in assessing thermal stability and degradation of wood
Charles Michael Albert and Kang Chiang LiewWood Science and Technology 59 (4) (2025)
https://doi.org/10.1007/s00226-025-01665-3
86 209 (2025)
https://doi.org/10.1007/978-3-031-99418-0_26
Relationship between structural characteristics of growth rings and strain accumulation in thermally modified Douglas fir wood during compressive test
Wanzhao Li, Ye Zhang, Xinzhou Wang and Junfeng WangWood Material Science & Engineering 20 (6) 1166 (2025)
https://doi.org/10.1080/17480272.2024.2386691
Performance of thermally modified wood strands and thin veneers for use in durable mass timber panels
Rajan Adhikari, Avishek Chanda, Muhammad Khusairy Bin Bakri, Modupe Morenike Akinnuoye, Manuel Raul Pelaez-Samaniego, Matthew Aro and Vikram YadamaCase Studies in Construction Materials 23 e04920 (2025)
https://doi.org/10.1016/j.cscm.2025.e04920
Influence of thermal-modification medium on photostability and physico-mechanical properties of rubberwood ( Hevea brasiliensis ) and Douglas fir ( Pseudotsuga menziesii ): a comparative study
Manjri Somal, Shailendra Kumar, Manoj Kumar Dubey, Deepak Kumar and Kamal MishraWood Material Science & Engineering 1 (2025)
https://doi.org/10.1080/17480272.2025.2547841
Dimensional stability and bending properties of silver birch ( Betula pendula Roth.) modified wood with sorbitol and different types of polycarboxylic acids
Sheikh Ali Ahmed and Reza HosseinpourpiaWood Material Science & Engineering 1 (2025)
https://doi.org/10.1080/17480272.2025.2595062
86 89 (2025)
https://doi.org/10.1007/978-3-031-99418-0_12
86 27 (2025)
https://doi.org/10.1007/978-3-031-99418-0_4
Impact of Thermal Treatment and Accelerated Aging on the Chemical Composition, Morphology, and Properties of Spruce Wood
František Kačík, Jozef Kúdela, Eva Výbohová, Tereza Jurczyková, Iveta Čabalová, Lukáš Adamčík, Elena Kmeťová and Danica KačíkováForests 16 (1) 180 (2025)
https://doi.org/10.3390/f16010180
Towards a New Plastination Technique for Moisture Management of Western Red Cedar Without Loss of Strength and with Enhanced Stability
Olivia H. Margoto, Madisyn M. Szypula, Grant R. Bogyo, Victor Yang and Abbas S. MilaniMaterials 18 (18) 4353 (2025)
https://doi.org/10.3390/ma18184353
86 96 (2025)
https://doi.org/10.1007/978-3-031-99418-0_13
Bending Properties of Pleated Wood Thermally Treated at 160 °C and 200 °C Temperatures
Mátyás Báder, Bíbor Júlia Horváth and Miklós BakForests 16 (11) 1702 (2025)
https://doi.org/10.3390/f16111702
Performance properties of heat treated and reinforced laminated veneer lumber with glass fiber
Osman PerçinMobilya ve Ahşap Malzeme Araştırmaları Dergisi 8 (1) 156 (2025)
https://doi.org/10.33725/mamad.1699980
Thermo-hygro-mechanical modification of plantation grown Melia dubia
Shailendra KumarJournal of the Indian Academy of Wood Science 22 (2) 275 (2025)
https://doi.org/10.1007/s13196-025-00384-3
Emprenye ve ısıl işlemin karaçam (Pinus nigra) ağacının fiziksel ve mekanik özellikleri üzerine etkileri
Bilal Doğan and Osman PerçinMobilya ve Ahşap Malzeme Araştırmaları Dergisi 8 (2) 358 (2025)
https://doi.org/10.33725/mamad.1806307
Physical and Mechanical Properties of Gmelina Wood (Gmelina arborea Roxb.) Modified with Furfuryl Alcohol-Tannin
Mahdi Mubarok, Pirda Maharani Nafisah, Adi Santoso, Efrida Basri, Yusuf Sudo Hadi, Adik Bahanawan, Rohmah Pari, Imam Busyra Abdillah, Jingjing Liao, Dede Hermawan, Trisna Priadi, Philippe Gérardin and Wayan DarmawanJournal of Renewable Materials 13 (4) 731 (2025)
https://doi.org/10.32604/jrm.2024.057476
Microbial decay of wooden structures: actors, activities and means of protection
Lauritz Schrader, Christian Brischke, Jochen Trautner and Christoph C. TebbeApplied Microbiology and Biotechnology 109 (1) (2025)
https://doi.org/10.1007/s00253-025-13443-z
Enhanced strength and chemical stability of Salix tetrasperma wood through thermal modification
Sufiya Shabir, Bhupender Dutt, Rajneesh Kumar, Dinesh Sharma and Irtizah MushtaqScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-27160-0
Comparative Study of Laboratory-Made Lignocellulosic Insulation Fiberboard Modification: Selected Physical, Mechanical, and Under-Fire Properties
Patryk Maciej Król, Anita Wronka, Szymon Kowaluk, Katarzyna Beata Król and Grzegorz KowalukForests 17 (1) 46 (2025)
https://doi.org/10.3390/f17010046
Long-term durability of flax-glass hybrid FRP-timber composite structures subjected to hygrothermal environment: Experimental and simulation
Silu Huang, Libo Yan, Bohumil Kasal and Yang WeiEngineering Structures 342 120889 (2025)
https://doi.org/10.1016/j.engstruct.2025.120889
Effects of pressurized N2 and steam as heating medium on the set recovery of surface compressed white poplar (Populus tomentosa)
Shanghuan Feng, Rongfeng Huang, Qin Xiang, Xiaoyu He, Yanwei Wang, Longxiang Sun and Jing LiEuropean Journal of Wood and Wood Products 83 (3) (2025)
https://doi.org/10.1007/s00107-025-02276-2
Enhancing adhesion strength of protein-based adhesives through plywood heat treatment
Yizhou Chen, Roselle Barretto, Guangyan Qi, Christopher Jones, Donghai Wang and Xiuzhi Susan SunInternational Journal of Adhesion and Adhesives 140 104029 (2025)
https://doi.org/10.1016/j.ijadhadh.2025.104029
(2024)
https://doi.org/10.2139/ssrn.4848566
Thermal modification of fast-growing Firmiana simplex wood using tin alloy: Evaluation of physical and mechanical properties
Kufre Edet Okon and Nkolika NdulueMaderas. Ciencia y Tecnología 27 (2024)
https://doi.org/10.22320/s0718221x/2025.03
Effect of steam explosion pretreatment on chosen saccharides yield and cellulose structure from fast-growing poplar (Populus deltoides × maximowiczii) wood
Donata Krutul, Jan Szadkowski, Eva Výbohová, Viera Kučerová, Iveta Čabalová, Andrzej Antczak, Dominika Szadkowska, Michał Drożdżek and Janusz ZawadzkiWood Science and Technology 58 (2) 441 (2024)
https://doi.org/10.1007/s00226-024-01532-7
Harnessing artificial neural networks and linear regression models for modeling thermal modification processes: Characterization by FTIR and prediction of the mechanical properties of eucalyptus wood
Youssef Elrhayam, Fatima Ezzahra Bennani, Mohamed Berradi, Ahmed El Yacoubi and Abderrahim El BachiriJournal of Analytical and Applied Pyrolysis 183 106809 (2024)
https://doi.org/10.1016/j.jaap.2024.106809
Effect of Heat Treatment on the Color and Hardness of Some Imported Wood Species for Decking
Jong Bum RaJournal of Agriculture & Life Science 58 (4) 65 (2024)
https://doi.org/10.14397/jals.2024.58.4.65
https://doi.org/10.12794/metadc2356219
How thermal treatment affects the chemical composition and the physical, mechanical and swelling properties of Scots pine juvenile and mature wood
Magdalena Broda, Carmen-Mihaela Popescu, Kamil Poszwa and Edward RoszykWood Science and Technology 58 (3) 1153 (2024)
https://doi.org/10.1007/s00226-024-01561-2
The effect of moisture content over the fibre saturation points on the impact strength of wood
Mojtaba Hassan Vand and Jan TippnerRoyal Society Open Science 11 (2) (2024)
https://doi.org/10.1098/rsos.231685
13 (2024)
https://doi.org/10.5772/intechopen.1007302
High temperature drying of sawn timber—A review
Ebrahim Hajian, Johannes A. J. Huber, Lars Hansson and Dick SandbergDrying Technology 42 (9) 1397 (2024)
https://doi.org/10.1080/07373937.2024.2365858
Effects of thermal modification on the flexure properties, fracture energy, and hardness of western hemlock
T. Nakagawa, E. Poulin, T. Rueppel, Z. Chen, J. Swinea, M. O’Brien, G. Houser, G. Wood, M. Weinheimer, P. Bahmani, P. Stynoski and M. SalviatoWood Science and Technology 58 (1) 109 (2024)
https://doi.org/10.1007/s00226-023-01511-4
Combining boron acid and heat treatment for enhanced durability of Cunninghamia konishii plantation wood
Yu-An Chen, Feng-Cheng Chang, Wei-Cheng Chao and Te-Hsin YangCase Studies in Construction Materials 21 e04019 (2024)
https://doi.org/10.1016/j.cscm.2024.e04019
Effects of oil heat treatment on poplar wood properties: A pilot scale study
Maryam Haseli, Davood Efhamisisi, Ali Abdulkhani, Reza Oladi, Bernhard Ungerer, Hajir Al-musawi, Erhard Halmschlager and Ulrich MüllerConstruction and Building Materials 430 136353 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.136353
The effect of long and short term elevated temperatures on the behaviour of lap glued joints of load-bearing spruce elements
J. Vaněrek, R. Bálková, M. Šmak, A. Běťák and Z. VejpustekInternational Journal of Adhesion and Adhesives 129 103575 (2024)
https://doi.org/10.1016/j.ijadhadh.2023.103575
Chemical Composition and Mechanical Properties of Wood after Thermal Modification in Closed Process under Pressure in Nitrogen
Juris Grinins, Guntis Sosins, Prans Brazdausks and Janis ZicansMaterials 17 (7) 1468 (2024)
https://doi.org/10.3390/ma17071468
Thermal modification of Lantana camara stalks and its characterization
Sanmitra Dan, Shailendra Kumar, Giridhar B. Nagarajappa and Krishna K. PandeyHolzforschung 78 (11-12) 704 (2024)
https://doi.org/10.1515/hf-2024-0040
Freeze-thaw Effect on the mechanical properties of different wood species: impact of moisture content variations, microscopic morphology, and thermal modification in a selected species
Stephen Asare, Megan Stoescu, Luis Balmori, Srinivas Allena, Emmanuel Kidando and Josiah Owusu-DanquahJournal of Infrastructure Preservation and Resilience 5 (1) (2024)
https://doi.org/10.1186/s43065-024-00108-w
Swelling behavior of thermally modified timber from a cellular and chemical perspective
Yufa Gao, Yongdong Zhou, Zongying Fu, Jan Van Den Bulcke and Joris Van AckerHolzforschung 77 (9) 713 (2023)
https://doi.org/10.1515/hf-2023-0033
The Impact of Earlywood and Latewood on the Compressive Stress of Thermally Modified Douglas Fir
Junfeng Wang, Kai Yang, Wanzhao Li, Xinzhou Wang, Jan Van den Bulcke and Joris Van AckerForests 14 (7) 1376 (2023)
https://doi.org/10.3390/f14071376
The Viscoelastic and Hygroscopicity Behavior of Delignified and Densified Poplar Wood
Jiajun Wang, Yubo Chai, Junliang Liu and J.Y. ZhuForests 14 (9) 1721 (2023)
https://doi.org/10.3390/f14091721
Surface carbonization of wood: comparison of the biological performance of Pinus taeda and Eucalyptus bosistoana woods modified by contact charring method
Ekim Elçin Soytürk, S. Nami Kartal, Rachel A. Arango, Katie M. Ohno, Edanur Solhan, İclal Çağlayan and Claudia Marcela IbanezWood Material Science & Engineering 18 (6) 1888 (2023)
https://doi.org/10.1080/17480272.2023.2198993
Physical and mechanical characteristics of poplar treated with phosphoric acid under low-temperature thermal modification
Cuimei Luo, Qihang Wang, Xujie Wang, Zijia Sun, Chusheng Qi and Jun MuWood Material Science & Engineering 18 (4) 1372 (2023)
https://doi.org/10.1080/17480272.2022.2141657
Influence of carbon fibre layers on the strength of thermally modified laminated veneer lumber
Osman Perçin and Onur ÜlkerPolímeros 33 (1) (2023)
https://doi.org/10.1590/0104-1428.20220070
Chemical Composition and Color of Short-Rotation Teak Wood Thermally Modified in Closed and Open Systems
Felipe da Silva Gomes, Miquéias de Souza Reis, Anna Clara Oliveira Rupf, Paulo Henrique dos Santos Silvares, Jessica Sabrina da Silva Ferreira, Luciano da Costa Dias, João Paulo Sardo Madi, Pedro Henrique Gonzalez de Cademartori, Humberto Fantuzzi Neto, Juarez Benigno Paes and Djeison Cesar BatistaApplied Sciences 13 (24) 13050 (2023)
https://doi.org/10.3390/app132413050
Selected Mechanical and Physical Properties of Thermally Modified Wood after Field Exposure Tests
Huijun Dong, Redžo Hasanagić, Leila Fathi, Mohsen Bahmani, Davor Kržišnik, Eli Keržič and Miha HumarForests 14 (5) 1006 (2023)
https://doi.org/10.3390/f14051006
Effect of the drying condition on the strength properties of Japanese larch board after vacuum heat treatment
Chang-Jin Lee and Seung-Won OhDrying Technology 41 (14) 2349 (2023)
https://doi.org/10.1080/07373937.2023.2241899
(2023)
https://doi.org/10.21203/rs.3.rs-3053466/v1
Effect of Low-Thermal Treatment on the Particle Size Distribution in Wood Dust after Milling
Martin Júda, Maciej Sydor, Tomasz Rogoziński, Martin Kučerka, Marta Pędzik and Richard KminiakPolymers 15 (4) 1059 (2023)
https://doi.org/10.3390/polym15041059
One-component polyurethane adhesives in timber engineering applications: A review
Younes Shirmohammadli, Antonio Pizzi, Gary M. Raftery and Ashkan HashemiInternational Journal of Adhesion and Adhesives 123 103358 (2023)
https://doi.org/10.1016/j.ijadhadh.2023.103358
Flexural behaviour of wood beams strengthened by flax-glass hybrid FRP subjected to hygrothermal and weathering exposures
Silu Huang, Libo Yan and Bohumil KasalConstruction and Building Materials 365 130076 (2023)
https://doi.org/10.1016/j.conbuildmat.2022.130076
Impact bending strength of thermally-modified timber
Mojtaba Hassan Vand and Jan TippnerHolzforschung 77 (11-12) 828 (2023)
https://doi.org/10.1515/hf-2023-0046
Characterisation of thermally treated beech and birch by means of quasi-static tests and ultrasonic waves
Hajir Al-musawi, Elisa Manni, Alexander Stadlmann, Bernhard Ungerer, Mojtaba Hassan Vand, Olaf Lahayne, Riccardo Nobile, Georg Baumann, Florian Feist and Ulrich MüllerScientific Reports 13 (1) (2023)
https://doi.org/10.1038/s41598-023-33054-w
Cross-laminated strand veneer lumber mass timber panels from thermally modified strands
Ruben Jerves, Vikram Yadama, Matthew Aro and Manuel Raul Pelaez-SamaniegoConstruction and Building Materials 368 130370 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.130370
Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch ( Larix sibirica L.) wood
Valentina Lo Giudice, Petar Antov, Daniel Koynov, Lubos Kristak, Seng Hua Lee, Muhammad Adly Rahandi Lubis, Marisabel Mecca, Nicola Moretti, Rupali Tiwari and Luigi TodaroWood Material Science & Engineering 18 (6) 1991 (2023)
https://doi.org/10.1080/17480272.2023.2212253
873 (2023)
https://doi.org/10.1007/978-3-030-81315-4_16
Impact of thermal modification on color and chemical changes of African padauk, merbau, mahogany, and iroko wood species
Milan Gaff, Ivan Kubovský, Adam Sikora, Danica Kačíková, Haitao Li, Matúš Kubovský and František KačíkREVIEWS ON ADVANCED MATERIALS SCIENCE 62 (1) (2023)
https://doi.org/10.1515/rams-2022-0277
(2023)
https://doi.org/10.2139/ssrn.4643710
High Leach-Resistant Fire-Retardant Modified Pine Wood (Pinus sylvestris L.) by In Situ Phosphorylation and Carbamylation
Chia-feng Lin, Olov Karlsson, Oisik Das, Rhoda Afriyie Mensah, George I. Mantanis, Dennis Jones, Oleg N. Antzutkin, Michael Försth and Dick SandbergACS Omega 8 (12) 11381 (2023)
https://doi.org/10.1021/acsomega.3c00146
Torrefaction for Improving Quality of Pellets Derived from Calliandra Wood
Johanes Pramana Gentur SUTAPA and Ahmad Harun HIDYATULLAHJournal of the Korean Wood Science and Technology 51 (5) 381 (2023)
https://doi.org/10.5658/WOOD.2023.51.5.381
Guinea Grass (Megathyrsus maximus) Fibres as Sorbent in Diesel Bioremediation
Farah Eryssa Khalid, Nur Nadhirah Zakaria, Alyza Azzura Azmi, Noor Azmi Shaharuddin, Suriana Sabri, Khalilah Abdul Khalil, Claudio Gomez-Fuentes, Azham Zulkharnain, Sooa Lim and Siti Aqlima AhmadSustainability 15 (5) 3904 (2023)
https://doi.org/10.3390/su15053904
Measurements of the mechanical properties of larch at elevated and high temperature under nitrogen conditions
Jin Qian, Kong Yue, Chenglong Lv, Lei Zhu, Xuekai Jiao, Peng Wu, Chao Xu and Keping SunPolymer Testing 128 108228 (2023)
https://doi.org/10.1016/j.polymertesting.2023.108228
Wood Modification Using Imidazole and Succinimide: Effects on Dimensional Stability and Bending Properties
Alexander Scharf, Henric Dernegård, Johan Oja, Dick Sandberg and Dennis JonesForests 14 (10) 1976 (2023)
https://doi.org/10.3390/f14101976
Sound Wave Absorption Coefficient and Sound Velocity in Thermally Modified Wood
Przemysław Mania, Artur Flach and Marta PilarskaApplied Sciences 13 (14) 8136 (2023)
https://doi.org/10.3390/app13148136
(2022)
https://doi.org/10.21203/rs.3.rs-2244819/v1
Ağaç malzeme yüzeylerine uygulanan poliüretan verniklerin parlaklığına ısıl işlem yöntemi ve işlem sıcaklığının etkisi
Erol KOÇ and Hüseyin PELİTOrmancılık Araştırma Dergisi 9 (Özel Sayı) 238 (2022)
https://doi.org/10.17568/ogmoad.1090092
Effect of temperature on color changes and mechanical properties of poplar/bismuth oxide wood alloy during warm-press forming
Jin Yan, Liqiang Zhang, Xianjun Li, Qingding Wu and Jianan LiuJournal of Wood Science 68 (1) (2022)
https://doi.org/10.1186/s10086-022-02032-7
Influence of Heat Treatment on Chemical and Mechanical Properties of Toona ciliata M. Roem. Wood
Vibha Sharma, Rajneesh Kumar, Bhupender Dutt and Varun AttriMaterial Science Research India 19 (1) 44 (2022)
https://doi.org/10.13005/msri/190105
Production of Wood Fibers from Thermally Treated Wood
Maximilien Gibier, Pierre Girods and Yann RogaumeFluid Dynamics & Materials Processing 18 (5) 1427 (2022)
https://doi.org/10.32604/fdmp.2022.022057
Effect of the Longitudinal Tensile Creep on the Stiffness of Radiata Pine (Pinus radiata D. Don)
Oswaldo Erazo, Judith Vergara-Figueroa, Paulina Valenzuela and William GacitúaMaterials 15 (12) 4314 (2022)
https://doi.org/10.3390/ma15124314
Color as an Indicator of Properties in Thermally Modified Scots Pine Sapwood
Magdalena Piernik, Magdalena Woźniak, Grzegorz Pinkowski, Kinga Szentner, Izabela Ratajczak and Andrzej KraussMaterials 15 (16) 5776 (2022)
https://doi.org/10.3390/ma15165776
The effect of the changes in chemical composition due to thermal treatment on the mechanical properties of Pinus densiflora
Qiushi Peng, Graham Ormondroyd, Morwenna Spear and Wen-Shao ChangConstruction and Building Materials 358 129303 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.129303
Effects of heat treatment on surface roughness and bonding strength of wood material
Osman PERÇİNMobilya ve Ahşap Malzeme Araştırmaları Dergisi 5 (1) 17 (2022)
https://doi.org/10.33725/mamad.1119735
A low-corrosivity structural timber
Sicen Yu, Yu Liu, Chaoji Chen, Shijie Feng, Amanda Pia Siciliano, Liangbing Hu and Ping LiuCell Reports Physical Science 3 (6) 100921 (2022)
https://doi.org/10.1016/j.xcrp.2022.100921
Effect of Primary Spruce Lamella Aging on the Bending Characteristics of Glulam Beams
Ladislav Reinprecht, Dávid Ciglian, Ján Iždinský and Ján SedliačikApplied Sciences 12 (24) 12872 (2022)
https://doi.org/10.3390/app122412872
Functionalized wood as bio-based advanced materials: Properties, applications, and challenges
Ramon Filipe Beims, Rosa Arredondo, Dennise Johanna Sosa Carrero, Zhongshun Yuan, Hongwei Li, Hengfu Shui, Yongsheng Zhang, Mathew Leitch and Chunbao Charles XuRenewable and Sustainable Energy Reviews 157 112074 (2022)
https://doi.org/10.1016/j.rser.2022.112074
Degradation of Chemical Components of Thermally Modified Robinia pseudoacacia L. Wood and Its Effect on the Change in Mechanical Properties
Adam Sikora, Kateřina Hájková and Tereza JurczykováInternational Journal of Molecular Sciences 23 (24) 15652 (2022)
https://doi.org/10.3390/ijms232415652
Mechanical properties and biological durability in soil contact of chemically modified wood treated in an open or in a closed system using glycerol/maleic anhydride systems
Mahdi Mubarok, Holger Militz, Stéphane Dumarcay, Wayan Darmawan, Yusuf Sudo Hadi and Philippe GérardinWood Material Science & Engineering 17 (5) 356 (2022)
https://doi.org/10.1080/17480272.2021.1872701
Sorption and diffusion properties of untreated and thermally modified beech wood dust
Jerzy Majka, Tomasz Rogoziński and Wiesław OlekWood Science and Technology 56 (1) 7 (2022)
https://doi.org/10.1007/s00226-021-01346-x
Review of Wood Modification and Wood Functionalization Technologies
Samuel L. Zelinka, Michael Altgen, Lukas Emmerich, Nathanael Guigo, Tobias Keplinger, Maija Kymäläinen, Emil E. Thybring and Lisbeth G. ThygesenForests 13 (7) 1004 (2022)
https://doi.org/10.3390/f13071004
Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment
Ming-Chi Hsieh, Ke-Chang Hung, Jin-Wei Xu, Yi-Hung Wu, Wen-Shao Chang and Jyh-Horng WuPolymers 15 (1) 147 (2022)
https://doi.org/10.3390/polym15010147
(2022)
https://doi.org/10.21203/rs.3.rs-2258916/v1
Karbon fiber ve cam fiber ile güçlendirilmiş ısıl işlem uygulanmış lamine kaplama kerestelerin (lvl) bazı fiziksel ve mekaniksel özellikleri
Ercan ÇİĞDEM and Osman PERÇİNGazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 38 (2) 653 (2022)
https://doi.org/10.17341/gazimmfd.984248
Effect of heat treatment on hardness, density and color of Populus × canadensis ‘I-214’ wood
Carla Taraborelli, Silvia Monteoliva, Gabriel Keil and Eleana SpaventoForest Systems 31 (3) e023 (2022)
https://doi.org/10.5424/fs/2022313-19558
Influence of Thermal Modification in Nitrogen Atmosphere on the Selected Mechanical Properties of Black Poplar Wood (Populus nigra L.)
Olga Bytner, Michał Drożdżek, Agnieszka Laskowska and Janusz ZawadzkiMaterials 15 (22) 7949 (2022)
https://doi.org/10.3390/ma15227949
Farklı yöntemlerle ısıl işlem uygulanmış ağaç malzemelerde yoğunluk ve eğilme direncinin belirlenmesi
Selçuk BAYRAKTAR and Hüseyin PELİTOrmancılık Araştırma Dergisi 9 (Özel Sayı) 355 (2022)
https://doi.org/10.17568/ogmoad.1090574
Mild hydrothermal modification of beech wood (Zelkova schneideriana Hand-Mzt): its physical, structural, and mechanical properties
Xinhao Feng, Jingyu Chen, Shuxian Yu, Zhihui Wu and Qiongtao HuangEuropean Journal of Wood and Wood Products 80 (4) 933 (2022)
https://doi.org/10.1007/s00107-022-01805-7
Impact of the Heat Treatment Duration on Color and Selected Mechanical and Chemical Properties of Scots Pine Wood
Magdalena Piernik, Magdalena Woźniak, Grzegorz Pinkowski, Kinga Szentner, Izabela Ratajczak and Andrzej KraussMaterials 15 (15) 5425 (2022)
https://doi.org/10.3390/ma15155425
Understanding the effect of combined thermal treatment and phenol–formaldehyde resin impregnation on the compressive stress of wood
Wanzhao Li, Zheng Zhang, Kai Yang, Changtong Mei, Jan Van den Bulcke and Joris Van AckerWood Science and Technology 56 (4) 1071 (2022)
https://doi.org/10.1007/s00226-022-01400-2
Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air
Intan Fajar Suri, Byantara Darsan Purusatama, Jong Ho Kim, Go Un Yang, Denni Prasetia, Gu Joong Kwon, Wahyu Hidayat, Seung Hwan Lee, Fauzi Febrianto and Nam Hun KimEuropean Journal of Wood and Wood Products 80 (6) 1389 (2022)
https://doi.org/10.1007/s00107-022-01840-4