Free access
Issue
Ann. For. Sci.
Volume 66, Number 7, October-November 2009
Article Number 711
Number of page(s) 8
DOI http://dx.doi.org/10.1051/forest/2009064
Published online 15 October 2009
References of  Ann. For. Sci. 66 (2009) 711
  1. Apiolaza L.A., Gilmour A.R., and Garrick D.J., 2000. Variance modelling of longitudinal height data from a Pinus radiata progeny test. Can. J. For. Res. 30: 645–654 [CrossRef].
  2. Apiolaza L.A., Raymond C.A., and Yeo B.J., 2005. Genetic variation of physical and chemical wood properties of Eucalyptus globulus. Silvae Genet. 54: 160–166.
  3. Barnes R.D., Mullin L.J., and Battle G., 1992. Genetic control of fifth year traits in Pinus patula Schiede & Deppe. Silvae Genet. 41: 242–248.
  4. Borallho N.M.G., Cotterill P.P., and Kanowski P., 1993. Breeding objectives for pulp production of Eucalyptus globulus under different industrial cost structures. Can. J. For. Res. 23: 648–656 [CrossRef].
  5. Bouvet J.M., Saya A., and Vigneron P., 2009. Trends in additive, dominance and environmental effects with age for growth traits in Eucalyptus hybrid populations. Euphytica 165: 35–54 [CrossRef].
  6. Clarke C., Garbutt D., and Pearce J., 1997. Growth and wood properties of provenances and trees of nine eucalypt species. APPITA J. 50: 121–130.
  7. Cornelius J., 1994. Heritabilities and additive genetic coefficients of variation in forest trees. Can. J. For. Res. 24: 372–379 [CrossRef].
  8. Darrow W.K. and Roeder K.R., 1983. Provenance trials of Eucalyptus urophylla and E. alba in South Africa: seven-year results. S. Afr. For. J. 125: 20–28.
  9. Downes G.M., Hudson I.L., Raymond C.A., Dean G.H., Michell A.J., Schimleck L.R., Evans R., and Muneri A., 1997. Sampling plantation eucalypts for wood and fibre properties. CSIRO Publishing, Melbourne, 132 p.
  10. Eldridge K.G., Harwood C., Van Wyk G., and Davidson J., 1994. Eucalypt domestication and breeding. Oxford University Press, New York, 312 p.
  11. Falconer D.S. and Mackay T.F.C., 1996. Introduction to quantitative genetics. Longman Group Ltd, Essex, 480 p.
  12. FAO, 2001. Global forest resource assessment 2000 main report: FAO Forestry paper 140. FAO, Rome, 479 p.
  13. Gaioto F.A., Bramucci M., and Grattapagalia D., 1997. Estimation of outcrossing rate in a breeding population of Eucalyptus urophylla with dominant RAPD and AFLP markers. Theor. Appl. Genet. 95: 842–849 [CrossRef].
  14. Gapare W.J., Gwaze D.P., and Musokonyi C., 2003. Genetic parameters estimates for growth traits and stem straightness in a breeding seedling orchard of Eucalyptus grandis. J. Trop. For. Sci. 15: 613–625.
  15. Gilmour A.R., Gogel B.J., Cullis B.R., Welham S.J., and Thompson R., 2006. ASReml user guide release 2.0. VSN International Ltd, Hemel Hempstead, 320 p.
  16. Greaves B. and Borallho N.M.G., 1996. The influence of basic density and pulp yield on the cost of eucalypt kraft pulping: a theoretical model for tree breeding. APPITA J. 49: 90–95.
  17. Greaves B.L., Borralho N.M.G., and Raymond C.A., 1997. Breeding objective for plantation eucalypts grown for production of kraft pulp. For. Sci. 43: 465–472.
  18. Hodge G.R., Pepe B., Wijoyo F.S., and Dvorak W.S., 2001. Early results of Eucalyptus urophylla provenance/progeny trials in Colombia and Venezuela. In: Developing the eucalypt of the future, Proceeding of IUFRO Working Party 2.08.03, Valdivia.
  19. House A.P.N. and Bell J.C., 1994. Isozyme variation and mating system in Eucalyptus urophylla S.T. Blake. Silvae Genet. 43: 167–176.
  20. Kien N.D., Jansson G., Harwood C., Almqvist C., and Thinh H.H., 2008. Genetic variation in wood basic density and pilodyn penetration and their relationships with growth, stem straghtness and branch size for Eucalyptus urophylla in Northern Vietnam. New Zealand J. For. Sci. 38: 160–175.
  21. Kien N.D., Jansson G., Harwood C., and Thinh H.H., 2009. Genetic control of growth and form in Eucalyptus urophylla in northern Vietnam. J. Trop. For. Sci. 21: 50–65.
  22. Kube P.D., Raymond C.A., and Banham P.W., 2001. Genetic parameters for diameter, basic density, cellulose content and fibre properties for Eucalyptus nitens. For. Genet. 8: 285–294.
  23. Kube P.D. and Raymond C.A., 2002. Prediction of whole-tree basic density and pulp yield using wood core samples in Eucalyptus nitens. Appita 55: 43–48.
  24. Matheson A.C. and Raymond C.A., 1984. Effects of thinning in progeny tests on estimates of genetic parameters in Pinus radiata. Silvae Genet. 33: 125–128.
  25. Miranda I. and Perreira H., 2002. Variation of pulpwood quality with provenances and site in Eucalyptus globulus. Ann. For. Sci. 59: 283–291 [EDP Sciences] [CrossRef].
  26. Mori E., Kageyama P., and Ferreira M., 1988. Genetic variation and progenies x localities interaction in Eucalyptus urophylla. Scientia Forestalis 39: 53–63 (in Portuguese).
  27. Olesen P.O., 1971. Water displacement method. A fast and accurate method to determine green volume of wood samples. Forest Tree Improvement 3: 1–23.
  28. Olson J.R., Jourdain C.R., and Rouseau R.J., 1985. Selection for cellulose content, specific gravity and volume in young Populus deltoides clones. Can. J. For. Res. 15: 393–396.
  29. Raymond C.A., 2002. Genetics of eucalyptus wood properties. Ann. For. Sci. 59: 525–531 [EDP Sciences] [CrossRef].
  30. Raymond C.A., Schimleck L., Muneri A., and Mitchell A.J., 2001a. Genetic parameters and genotype-by-environment interactions for pulp yield predicted using near infrared reflectance analysis and pulp productivity in Eucalyptus globulus. For. Genet. 8: 213–224.
  31. Raymond C.A., Schimleck L.R., Muneri A., and Michell A.J., 2001b. Nondestructive sampling of Eucalyptus globulus and E. nitens for wood properties. III. Predicted pulp yield using near infrared reflectance analysis. Wood Sci. Technol. 35: 203–215.
  32. Raymond C.A. and Schimleck L.R., 2002. Development of near infrared reflectance analysis calibrations for estimating genetic parameters for cellulose content in Eucalyptus globulus. Can. J. For. Res. 32: 170–176 [CrossRef].
  33. RISI, 2008. World pulp annual historical data, RISI, 113 p.
  34. Santos P.E.T., 1990. Potential for genetic improvement program, estimates of genetic parameters and genotype x environment interaction in Eucalyptus urophylla S. T. Blake stands. Scientia Forestalis 43–44: 11–19 (in Portuguese).
  35. SAS Institute, 2004. SAS/STAT 9.1 User's Guide, SAS Institute Inc., Cary.
  36. Schimleck L., Rezende S.P., Demuner B.J., and Downes G.M., 2006. Estimation of whole-tree wood quality traits using near infrared spectra from increment cores. APPITA J. 59: 231–236.
  37. Schimleck L.R., Kube P., and Raymond C.A., 2004. Genetic improvement of kraft pulp yield in Eucalyptus nitens using cellulose content determined by near infrared spectroscopy. Can. J. For. Res. 34: 2263–2370 [CrossRef].
  38. Schimleck L.R. and Mitchell A.J., 1998. Determination of kraft pulp yield using near infrared spectroscopy. TAPPI J. 81: 229–236.
  39. Schimleck L.R., Payne P., and Wearne R.H., 2005. Determination of important pulp properties of hybrid poplar by near infrared spectroscopy. Wood Fiber Sci. 37: 462–471.
  40. Sjöström E., 1992. Wood chemistry: Fundamentals and Applications. Academic Press Inc., San Diego, 293 p.
  41. Smook G.A., 1992. Handbook for pulp and paper technologists, TAPPI Press, 419 p.
  42. Tibbits W. and Hodge G., 1998. Genetic parameters and breeding value predictions for Eucalyptus nitens wood fiber production traits. For. Sci. 44: 587–598.
  43. Tripiana V., Bourgeois M., Verhaegen D., Vigneron P., and Bouvet J.M., 2007. Combining microsatelites, growth, and adaptive traits for managing in situ genetic resources of Eucalyptus urophylla. Can. J. For. Res. 37: 773–785 [CrossRef].
  44. Wallis A.F.A., Wearne R.H., and Wright P.J., 1997. New approaches to rapid analysis of cellulose in wood. Proceedings of the 9th International Symposium on Wood and Pulping Chemistry, Montréal.
  45. Wallis A.S.A., Wearne R.H., and Wright P.J., 1996. Analytical characteristics of plantation eucalypt woods relating to kraft pulp yields. APPITA J. 49: 427–432.
  46. Wei X. and Borralho N.M.G., 1997. Genetic control of wood basic density and bark thickness and their relationships with growth traits of Eucalyptus urophylla in south east China. Silvae Genet. 46: 245–250.
  47. Wei X. and Borallho N.M.G., 1998a. Genetic control of growth traits of Eucalyptus urophylla S. T. Blake in south east China. Silvae Genet. 47: 158–165
  48. Wei X. and Borallho N.M.G., 1998b. Use of individual tree mixed models to account for mortality and selective thinning when estimating base population genetic parameters. For. Sci. 44: 246–252.
  49. Williams E.R. and Matheson A.C., 1994. Experimental design and analysis for use in tree improvement. CSIRO Publishing, Melbourne, 174 p.