Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The potential of wood ray cells in beech (Fagus sylvatica) as a design parameter for veneer-based products

Bernhard Ungerer, Hajir Al-musawi, Maximilian Pramreiter, Gabriel Praxmarer, Kevin Vitzthum, Johannes Painer, Thomas Krenke and Ulrich Müller
Construction and Building Materials 486 141922 (2025)
https://doi.org/10.1016/j.conbuildmat.2025.141922

Environmental and ontogeny effects in wood fiber properties of Pterocarpus ericaneus (Poir.)

Kossi Novinyo Segla, Kossi Adjonou, Rabiou Habou, Adzo Dzifa Kokutse, Ali Mahamane, Patrick Langbour, Daniel Guibal, Gilles Chaix and Kouami Kokou
Wood Material Science & Engineering 19 (3) 627 (2024)
https://doi.org/10.1080/17480272.2023.2286447

Stiffness of normal, opposite, and tension poplar wood determined using micro-samples in the three material directions

Patrick Perre, Anh Tuan Dinh, Carole Assor, Xavier Frank and Gilles Pilate
Wood Science and Technology 47 (3) 481 (2013)
https://doi.org/10.1007/s00226-012-0511-x

Plant micro- and nanomechanics: experimental techniques for plant cell-wall analysis

Ingo Burgert and Tobias Keplinger
Journal of Experimental Botany 64 (15) 4635 (2013)
https://doi.org/10.1093/jxb/ert255

Transverse anisotropy of compressive failure in European oak – a digital speckle photography study

Jonas Ljungdahl, Lars A. Berglund and Magnus Burman
hfsg 60 (2) 190 (2006)
https://doi.org/10.1515/HF.2006.031

Quantitative microtomography: measurement of density distribution in glass wool and local evolution during a one-dimensional compressive load

E Badel, J-M L tang, G Peix and D Babot
Measurement Science and Technology 14 (4) 410 (2003)
https://doi.org/10.1088/0957-0233/14/4/302

Laboratory apparatuses measuring 3D displacement fields involved in distortion of commercial size wood products due to moisture content change.

T. Constant and É. Farré
Holz als Roh- und Werkstoff 61 (3) 173 (2003)
https://doi.org/10.1007/s00107-003-0370-0

The radial reinforcement of the wood structure and its implication on mechanical and fracture mechanical properties—A comparison between two tree species

A. Reiterer, I. Burgert, G. Sinn and S. Tschegg
Journal of Materials Science 37 (5) 935 (2002)
https://doi.org/10.1023/A:1014339612423

The Influence of Rays on the Transverse Elastic Anisotropy in Green Wood of Deciduous Trees

I. Burgert, A. Bernasconi, K.J. Niklas and D. Eckstein
Holzforschung 55 (5) 449 (2001)
https://doi.org/10.1515/HF.2001.074