A new experimental device for rapid measurement of the trunk equivalent modulus of elasticity on standing trees
Ann. For. Sci., 57 4 (2000) 361-359
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Prediction of Acoustic Velocity Properties of Downed Pine Trees Using Near-Infrared Spectroscopy
Munkaila Musah, Abiodun O. Alawode, Javier Hernandez Diaz, Osei Asafu-Adjaye, Tom Gallagher, Maria S. Peresin, Yucheng Peng, Dana Mitchell, Mathew Smidt and Brian ViaForest Products Journal 73 (2) 133 (2023)
https://doi.org/10.13073/FPJ-D-22-00067
Non-destructive acoustic assessment of wood quality in trees and logs and the effects of silvicultural treatments: a review
K. O. Olaoye and M. O. OjoInternational Wood Products Journal 13 (3) 156 (2022)
https://doi.org/10.1080/20426445.2022.2061255
Accurate estimation of log MOE from non-destructive standing tree measurements
Chandan Kumar, Steven Psaltis, Henri Bailleres, et al.Annals of Forest Science 78 (1) (2021)
https://doi.org/10.1007/s13595-021-01031-w
A new approach for predicting board MOE from increment cores
Steven Psaltis, Chandan Kumar, Ian Turner, Elliot J. Carr, Troy Farrell, Loïc Brancheriau, Henri Bailléres and David J. LeeAnnals of Forest Science 78 (3) (2021)
https://doi.org/10.1007/s13595-021-01093-w
Non-Destructive Evaluation Techniques and What They Tell Us about Wood Property Variation
Laurence Schimleck, Joseph Dahlen, Luis A. Apiolaza, Geoff Downes, Grant Emms, Robert Evans, John Moore, Luc Pâques, Jan Van den Bulcke and Xiping WangForests 10 (9) 728 (2019)
https://doi.org/10.3390/f10090728
Verification of Trunk Modulus of Elasticity Obtained by Improved Tree Bending Tests
Erika Heki, Akio Koizumi, Yoshihisa Sasaki and Hiroyuki ToritaMokuzai Gakkaishi 64 (3) 115 (2018)
https://doi.org/10.2488/jwrs.64.115
Solid Wood Properties Assessed by Non-Destructive Measurements of Standing European Larch (Larix decidua Mill.): Environmental Effects on Variation within and among Trees and Forest Stands
Petr Škorpík, Heino Konrad, Thomas Geburek, et al.Forests 9 (5) 276 (2018)
https://doi.org/10.3390/f9050276
Composition of hybrid larch (Larix × eurolepis Henry) forest reproductive materials: How much does hybrid percentage affect stand performance?
Gwenaël Philippe, Corinne Buret, Stéphane Matz and Luc E. PâquesNew Forests 47 (4) 541 (2016)
https://doi.org/10.1007/s11056-016-9530-z
The prediction of the flexural lumber properties from standing South African-grown Pinus patula trees
C. B. Wessels, F. S. Malan, T. Seifert, J. H. Louw and T. RypstraEuropean Journal of Forest Research 134 (1) 1 (2015)
https://doi.org/10.1007/s10342-014-0829-z
A review of measurement methods used on standing trees for the prediction of some mechanical properties of timber
C. B. Wessels, F. S. Malan and T. RypstraEuropean Journal of Forest Research 130 (6) 881 (2011)
https://doi.org/10.1007/s10342-011-0484-6
Selection perspectives for genetic improvement of wood stiffness in hybrid larch (Larix x eurolepis Henry)
Luc E. Pâques, Frédéric Millier and Philippe RozenbergTree Genetics & Genomes 6 (1) 83 (2010)
https://doi.org/10.1007/s11295-009-0230-0
Ranking larch genotypes with the Rigidimeter: relationships between modulus of elasticity of standing trees and of sawn timber
Luc E. Pâques and Philippe RozenbergAnnals of Forest Science 66 (4) 414 (2009)
https://doi.org/10.1051/forest/2009011