The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Generalized cutting force model for peripheral milling of wood, based on the effect of density, uncut chip cross section, grain orientation and tool helix angle
Proceedings of the Third International Symposium on Materials and Sustainable Development
Bourab Fatma-zohra, Aknouche Hamid and Hamrani Abderrachid Proceedings of the Third International Symposium on Materials and Sustainable Development 620 (2018) https://doi.org/10.1007/978-3-319-89707-3_66
ORTHOGONAL CUTTING STUDY OF WOOD AND KNOTS OF WHITE SPRUCE
Specific Cutting Forces of Isotropic and Orthotropic Engineered Wood Products by Round Shape Machining
Giacomo Goli, Rémi Curti, Bertrand Marcon, Antonio Scippa, Gianni Campatelli, Rocco Furferi and Louis Denaud Materials 11(12) 2575 (2018) https://doi.org/10.3390/ma11122575
Wood machining with a focus on French research in the last 50 years
Bernard Thibaut, Louis Denaud, Robert Collet, Rémy Marchal, Jacques Beauchêne, Frédéric Mothe, Pierre-Jean Méausoone, Patrick Martin, Pierre Larricq and Florent Eyma Annals of Forest Science 73(1) 163 (2016) https://doi.org/10.1007/s13595-015-0460-2
Influence of anatomy and basic density on specific cutting force for wood from Corymbia citriodora Hill & Johnson
Luiz-E. De L. Melo, José-R. M. da Silva, Alfredo Napoli, José-T. Lima and Débora-F. R. Nascimento Forest Systems 24(3) e036 (2015) https://doi.org/10.5424/fs/2015243-07712
Cutting forces in bandsaw processing of oak and beech wood as affected by wood moisture content and cutting directions
Payam Moradpour, Kazem Doosthoseini, Frieder Scholz and Asghar Tarmian European Journal of Wood and Wood Products 71(6) 747 (2013) https://doi.org/10.1007/s00107-013-0734-z
Main cutting force models for two species of tropical wood
Up-milling and down-milling wood with different grain orientations – the cutting forces behaviour
Giacomo Goli, Marco Fioravanti, Rémy Marchal, Luca Uzielli and Simone Busoni European Journal of Wood and Wood Products 68(4) 385 (2010) https://doi.org/10.1007/s00107-009-0374-5
Fracture toughness, chip types and the mechanics of cutting wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
Rémy Marchal, Frédéric Mothe, Louis-Etienne Denaud, Bernard Thibaut and Laurent Bleron Holzforschung 63(2) 157 (2009) https://doi.org/10.1515/HF.2009.014
Evaluation of surface quality of some Malaysian species as function of outdoor exposure