Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values
Ann. For. Sci., 62 5 (2005) 441-447
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Comparative Analysis of Cutting Forces in CNC Milling of MDF: The Role of Tool Coatings, Cutting Speed, and Feed Per Tooth
Luďka Hanincová, Jiří Procházka and Vít NovákCoatings 14 (9) 1085 (2024)
https://doi.org/10.3390/coatings14091085
Influence of Circular Saw Blade Design on Reducing Energy Consumption of a Circular Saw in the Cutting Process
Ján Svoreň, Ľubomír Naščák, Štefan Barcík, Peter Koleda and Štefan StehlíkApplied Sciences 12 (3) 1276 (2022)
https://doi.org/10.3390/app12031276
Reducing the Energy Consumption of Circular Saws in the Cutting Process of Plywood
Jozef Fekiač, Ján Svoreň, Jozef Gáborík and Miroslav NěmecCoatings 12 (1) 55 (2022)
https://doi.org/10.3390/coatings12010055
ODUN VE ODUN KÖKENLİ MALZEMELERDE İŞLEME MEKANİKLERİNİ ETKİLEYEN FAKTÖRLER
Ali CAKMAKTurkish Journal of Forest Science 6 (2) 629 (2022)
https://doi.org/10.32328/turkjforsci.1167080
Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors
Ondrej Dvoracek, Daniel Lechowicz, Thomas Krenke, et al.The International Journal of Advanced Manufacturing Technology 113 (5-6) 1685 (2021)
https://doi.org/10.1007/s00170-021-06769-1
Cutting Forces in Peripheral Up-Milling of Particleboard
Bartosz PałubickiMaterials 14 (9) 2208 (2021)
https://doi.org/10.3390/ma14092208
Cutting forces and accuracy characterization during wood machining with serial robots
Oussama Ayari, Anis Bouali and Pierre-Jean MéausooneEuropean Journal of Wood and Wood Products 78 (4) 767 (2020)
https://doi.org/10.1007/s00107-020-01539-4
A review on wood machining: characterization, optimization, and monitoring of the sawing process
Vahid Nasir and Julie CoolWood Material Science & Engineering 15 (1) 1 (2020)
https://doi.org/10.1080/17480272.2018.1465465
The effect of rotation speed on the power consumption and cutting accuracy of guided circular saw: Experimental measurement and analysis of saw critical and flutter speeds
Vahid Nasir, Ahmad Mohammadpanah and Julie CoolWood Material Science & Engineering 15 (3) 140 (2020)
https://doi.org/10.1080/17480272.2018.1508167
Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood
Vahid Nasir and Julie CoolEuropean Journal of Wood and Wood Products 77 (4) 609 (2019)
https://doi.org/10.1007/s00107-019-01412-z
A Predictive Model of the Optimal Tool Edge Geometry for Veneer Cutting Processes
Fatma Zohra Bouarab, Abdelhamid H. Aknouche and Abderrachid HamraniMachining Science and Technology 23 (5) 758 (2019)
https://doi.org/10.1080/10910344.2019.1584820
Proceedings of the Third International Symposium on Materials and Sustainable Development
Bourab Fatma-zohra, Aknouche Hamid and Hamrani AbderrachidProceedings of the Third International Symposium on Materials and Sustainable Development 620 (2018)
https://doi.org/10.1007/978-3-319-89707-3_66
A Possible Correlation Investigation between Young's Modulus and Thermal Properties of Green Composites
Mourad Chikhi, Boudjemaa Agoudjil and Fatiha MokhtariMaterials Science Forum 895 52 (2017)
https://doi.org/10.4028/www.scientific.net/MSF.895.52
Influence of anatomy and basic density on specific cutting force for wood from Corymbia citriodora Hill & Johnson
Luiz-E. De L. Melo, José-R. M. da Silva, Alfredo Napoli, José-T. Lima and Débora-F. R. NascimentoForest Systems 24 (3) e036 (2015)
https://doi.org/10.5424/fs/2015243-07712
Analysis of chip formation mechanisms and modelling of slabber process
Renaud Pfeiffer, Robert Collet, Louis Etienne Denaud and Guillaume FromentinWood Science and Technology 49 (1) 41 (2015)
https://doi.org/10.1007/s00226-014-0680-x
A theoretical and experimental study of the circular sawing process
Lisbeth M. Hellström, Sven-Olov Biller, Sverker Edvardsson and Per A. GradinHolzforschung 68 (3) 307 (2014)
https://doi.org/10.1515/hf-2013-0066
An original impact device for biomass characterisation: results obtained for spruce and poplar at different moisture contents
Floran Pierre, Giana Almeida, Françoise Huber, Philippe Jacquin and Patrick PerréWood Science and Technology 47 (3) 537 (2013)
https://doi.org/10.1007/s00226-012-0512-9
https://doi.org/10.1002/9781118602713.ch2
Up-milling and down-milling wood with different grain orientations – the cutting forces behaviour
Giacomo Goli, Marco Fioravanti, Rémy Marchal, Luca Uzielli and Simone BusoniEuropean Journal of Wood and Wood Products 68 (4) 385 (2010)
https://doi.org/10.1007/s00107-009-0374-5
Tool Temperature and Cutting Forces during the Machining of Particleboard and Solid Wood
J. Ratnasinga, T. Pew Ma and G. RamasamyJournal of Applied Sciences 10 (22) 2881 (2010)
https://doi.org/10.3923/jas.2010.2881.2886
Online control of wood peeling process: Acoustical and vibratory measurements of lathe checks frequency
Louis Étienne Denaud, Laurent Bléron, Alain Ratle and Rémy MarchalAnnals of Forest Science 64 (5) 569 (2007)
https://doi.org/10.1051/forest:2007034