Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Microscopic mechanism of contraction of tension wood G-fiber due to boiling

Hiroyuki Yamamoto, K. C. Sujan, Miyuki Matsuo-Ueda, Masato Yoshida and Shuoye Chen
Cellulose 29 (14) 7935 (2022)
https://doi.org/10.1007/s10570-022-04742-z

Reduction of growth stresses in logs of Hieronyma alchorneoides Allemão from fast-growth plantations using steaming and heating: effects on the quality of lumber

Róger Moya and Carolina Tenorio
Annals of Forest Science 78 (3) (2021)
https://doi.org/10.1007/s13595-021-01090-z

Experimental study of the effect of soaking temperature on the peeling parameters of two oak species (Quercus canariensis Willd. and Quercus afares Pomel)

Zouheyr Benbrahim, Benamar Benotmane, Abdellatif Zerizer, Louis Denaud and Remy Marchal
Wood Material Science & Engineering 15 (4) 241 (2020)
https://doi.org/10.1080/17480272.2019.1580766

Delayed recovery of growth stress in tension wood induced by drying and subsequent wetting treatment

K. C. Sujan, Hiroyuki Yamamoto, Miyuki Ueda Matsuo, Masato Yoshida and Keiichi Asaka
Wood Science and Technology 52 (4) 1049 (2018)
https://doi.org/10.1007/s00226-018-1009-y

Viscoelastic modeling of wood in the process of formation to clarify the hygrothermal recovery behavior of tension wood

Marie Capron, Sandrine Bardet, K. C. Sujan, Miyuki Matsuo-Ueda and Hiroyuki Yamamoto
Journal of Materials Science 53 (2) 1487 (2018)
https://doi.org/10.1007/s10853-017-1573-9

Is hygrothermal recovery of tension wood temperature-dependent?

K. C. Sujan, Hiroyuki Yamamoto, Miyuki Matsuo, et al.
Wood Science and Technology 50 (4) 759 (2016)
https://doi.org/10.1007/s00226-016-0817-1

Influence of site, storage and steaming on Eucalyptus nitens log-end splitting

Mario Vega, Matthew G. Hamilton, David P. Blackburn, Robert L. McGavin, Henri Baillères and Brad M. Potts
Annals of Forest Science 73 (2) 257 (2016)
https://doi.org/10.1007/s13595-015-0496-3

Hygrothermal recovery of compression wood in relation to elastic growth stress and its physicochemical characteristics

Miyuki Ueda Matsuo, Ginji Niimi, K. C. Sujan, Masato Yoshida and Hiroyuki Yamamoto
Journal of Materials Science 51 (17) 7956 (2016)
https://doi.org/10.1007/s10853-016-0065-7

Continuum contraction of tension wood fiber induced by repetitive hygrothermal treatment

KC Sujan, Hiroyuki Yamamoto, Miyuki Matsuo, et al.
Wood Science and Technology 49 (6) 1157 (2015)
https://doi.org/10.1007/s00226-015-0762-4

Retarded recovery of remaining growth stress in Agathis wood specimen caused by drying and subsequent re-swelling treatments

Midori Tanaka, Hiroyuki Yamamoto, Masato Yoshida, Miyuki Matsuo and Abubakar M. Lahjie
European Journal of Wood and Wood Products (2015)
https://doi.org/10.1007/s00107-015-0880-6

A model to simulate the gravitropic response and internal stresses in trees, considering the progressive maturation of wood

Guillaume Pot, Catherine Coutand, Evelyne Toussaint, Jean-Benoît Le Cam and Marc Saudreau
Trees 28 (4) 1235 (2014)
https://doi.org/10.1007/s00468-014-1033-y

The interrelation between microfibril angle (MFA) and hygrothermal recovery (HTR) in compression wood and normal wood of Sugi and Agathis

Midori Tanaka, Hiroyuki Yamamoto, Miho Kojima, et al.
Holzforschung 68 (7) 823 (2014)
https://doi.org/10.1515/hf-2013-0153

Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements

Sandrine Bardet and Joseph Gril
Comptes Rendus. Mécanique 330 (8) 549 (2002)
https://doi.org/10.1016/S1631-0721(02)01503-6

Mechanics of wood and trees: some new highlights for an old story

Bernard Thibaut, Joseph Gril and Mériem Fournier
Comptes Rendus de l Académie des Sciences - Series IIB - Mechanics 329 (9) 701 (2001)
https://doi.org/10.1016/S1620-7742(01)01380-0