Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Influence of morphology on the effective hygro-elastic properties of softwood (spruce) and hardwood (balsa)

M. A. Livani, E. Bosco and A. S. J. Suiker
Archive of Applied Mechanics 91 (10) 4141 (2021)
https://doi.org/10.1007/s00419-021-01994-2

Modeling of wood-like cellular materials with a geometrical data extraction algorithm

Alp Karakoҫ, Johanna Sjölund, Mehedi Reza, Jouni Freund, Albert Hernandez-Estrada and Jouni Paltakari
Mechanics of Materials 93 209 (2016)
https://doi.org/10.1016/j.mechmat.2015.10.019

Distribution of structure and lignin within growth rings of Norway spruce

Christian Lanvermann, Robert Evans, Uwe Schmitt, Stefan Hering and Peter Niemz
Wood Science and Technology 47 (3) 627 (2013)
https://doi.org/10.1007/s00226-013-0529-8

Stiffness of normal, opposite, and tension poplar wood determined using micro-samples in the three material directions

Patrick Perre, Anh Tuan Dinh, Carole Assor, Xavier Frank and Gilles Pilate
Wood Science and Technology 47 (3) 481 (2013)
https://doi.org/10.1007/s00226-012-0511-x

Variation of measured cross-sectional cell dimensions and calculated water vapor permeability across a single growth ring of spruce wood

Dominique Derome, Wolfgang Zillig and Jan Carmeliet
Wood Science and Technology 46 (5) 827 (2012)
https://doi.org/10.1007/s00226-011-0445-8

Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulation

Vaclav Sebera and Lech Muszyński
Holzforschung 65 (6) 811 (2011)
https://doi.org/10.1515/HF.2011.110

Multiscale Modeling of Drying as a Powerful Extension of the Macroscopic Approach: Application to Solid Wood and Biomass Processing

Patrick Perré
Drying Technology 28 (8) 944 (2010)
https://doi.org/10.1080/07373937.2010.497079

Hierarchical modelling of microstructural effects on mechanical properties of wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture

Karin Hofstetter and E. Kristofer Gamstedt
Holzforschung 63 (2) 130 (2009)
https://doi.org/10.1515/HF.2009.018

Three-dimensional imaging and analysis of infested coated wood with X-ray submicron CT

Jan Van den Bulcke, Bert Masschaele, Manuel Dierick, et al.
International Biodeterioration & Biodegradation 61 (3) 278 (2008)
https://doi.org/10.1016/j.ibiod.2007.09.004