Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Reducing the Energy Consumption of Circular Saws in the Cutting Process of Plywood

Jozef Fekiač, Ján Svoreň, Jozef Gáborík and Miroslav Němec
Coatings 12 (1) 55 (2022)

Influence of Circular Saw Blade Design on Reducing Energy Consumption of a Circular Saw in the Cutting Process

Ján Svoreň, Ľubomír Naščák, Štefan Barcík, Peter Koleda and Štefan Stehlík
Applied Sciences 12 (3) 1276 (2022)

Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors

Ondrej Dvoracek, Daniel Lechowicz, Thomas Krenke, et al.
The International Journal of Advanced Manufacturing Technology 113 (5-6) 1685 (2021)

The effect of rotation speed on the power consumption and cutting accuracy of guided circular saw: Experimental measurement and analysis of saw critical and flutter speeds

Vahid Nasir, Ahmad Mohammadpanah and Julie Cool
Wood Material Science & Engineering 15 (3) 140 (2020)

Cutting forces and accuracy characterization during wood machining with serial robots

Oussama Ayari, Anis Bouali and Pierre-Jean Méausoone
European Journal of Wood and Wood Products 78 (4) 767 (2020)

Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood

Vahid Nasir and Julie Cool
European Journal of Wood and Wood Products 77 (4) 609 (2019)

A Predictive Model of the Optimal Tool Edge Geometry for Veneer Cutting Processes

Fatma Zohra Bouarab, Abdelhamid H. Aknouche and Abderrachid Hamrani
Machining Science and Technology 23 (5) 758 (2019)

Proceedings of the Third International Symposium on Materials and Sustainable Development

Bourab Fatma-zohra, Aknouche Hamid and Hamrani Abderrachid
Proceedings of the Third International Symposium on Materials and Sustainable Development 620 (2018)

Analysis of chip formation mechanisms and modelling of slabber process

Renaud Pfeiffer, Robert Collet, Louis Etienne Denaud and Guillaume Fromentin
Wood Science and Technology 49 (1) 41 (2015)

Influence of anatomy and basic density on specific cutting force for wood from Corymbia citriodora Hill & Johnson

Luiz-E. De L. Melo, José-R. M. da Silva, Alfredo Napoli, José-T. Lima and Débora-F. R. Nascimento
Forest Systems 24 (3) e036 (2015)

A theoretical and experimental study of the circular sawing process

Lisbeth M. Hellström, Sven-Olov Biller, Sverker Edvardsson and Per A. Gradin
Holzforschung 68 (3) 307 (2014)

An original impact device for biomass characterisation: results obtained for spruce and poplar at different moisture contents

Floran Pierre, Giana Almeida, Françoise Huber, Philippe Jacquin and Patrick Perré
Wood Science and Technology 47 (3) 537 (2013)

Up-milling and down-milling wood with different grain orientations – the cutting forces behaviour

Giacomo Goli, Marco Fioravanti, Rémy Marchal, Luca Uzielli and Simone Busoni
European Journal of Wood and Wood Products 68 (4) 385 (2010)

Tool Temperature and Cutting Forces during the Machining of Particleboard and Solid Wood

J. Ratnasinga, T. Pew Ma and G. Ramasamy
Journal of Applied Sciences 10 (22) 2881 (2010)

Online control of wood peeling process: Acoustical and vibratory measurements of lathe checks frequency

Louis Étienne Denaud, Laurent Bléron, Alain Ratle and Rémy Marchal
Annals of Forest Science 64 (5) 569 (2007)