Free Access
Issue |
Ann. For. Sci.
Volume 64, Number 7, October-November 2007
|
|
---|---|---|
Page(s) | 679 - 690 | |
DOI | https://doi.org/10.1051/forest:2007048 | |
Published online | 11 October 2007 |
References of
Ann. For. Sci. 64 (2007) 679-690
- Banoub J.H., Delmas M., JMS letters, J. Mass Spectrom. 38 (2003) 900-903 [PubMed].
- Bekhta P., Niemz P., Effect of high temperature on the change in colour, dimensional stability and mechanical properties of spruce wood, Holzforschung 57 (2003) 539-546.
- Bhuiyan M.T.R., Hirai N., Changes in crystallinity in wood cellulose by heat treatment under dried and moist conditions, J. Wood Sci. 46 (2000) 431-436 [CrossRef].
- Bobleter O., Binder H., Dynamischer hydrothermaler Abbau von Holz, Holzforschung 34 (1980) 48-51.
- Boonstra M.J., Blomberg J., Semi-isostatic densification of heat treated radiata pine, Wood Sci. Technol. 7 (2007) DOI: 10.1007/s00226-007-0140-y.
- Boonstra M.J., Tjeerdsma B.F., Chemical analysis of heat treated softwoods, Holz Roh.-Werkst. 64 (2006) 204-211 [CrossRef].
- Boonstra M.J., Tjeerdsma B.F., Groeneveld H.A.C., Thermal modification of non-durable wood species. Part 1. The Plato technology: thermal modification of wood, International Research Group on Wood Preservation, Document No. IRG/WP 98-40123, 1998.
- Boonstra M.J., Rijsdijk J.F., Sander C., Kegel E., Tjeerdsma B.F., Militz H., Van Acker J., Stevens M., Microstructural and physical aspects of heat treated wood. Part 1. Softwoods, Maderas Ciencia y tecnología 8 (2006) 193-208.
- Boonstra M.J., Van Acker J., Kegel E., The effect of a two-stage heat treatment process on the mechanical properties of full size Norway spruce posts, submitted to Wood Mat. Sci. Eng. (2007).
- Bourgois J., Guyonnet R., Characterization and analysis of torrefied wood, Wood Sci. Technol. 22 (1988)143-155.
- Brown H.P., Panshin A.J., Forsaith C.C., Working stresses for wood, in: Textbook of wood technology, McGraw-Hill, Book company, Inc., New York, Toronto, London, 1952, pp. 474-499.
- Burmester A., Einfluss einer Wärme-Druck-Behandlung haldtrockenen Holzes auf seine Formbeständigkeit, Holz Roh- Werkst. 31 (1973) 237-243 [CrossRef].
- Burmester A., Zur Dimensionsstabilisierung von Holz, Holz Roh- Werkst. 33 (1975) 333-335 [CrossRef].
- Davis W.H., Thompson W.S., Influence of thermal treatments of short duration on the toughness and chemical composition of wood, For. Prod. J. 14 (1964) 350-356.
- Fengel D., Wegener G., Wood: Chemistry, Ultrastructure, Reactions, Walter de Gruyter and Co. Berlin, New York, 1984.
- Garrote G., Dominguez H., Parajo J.C., Hydrothermal processing of lignocellulosic materials. Holz Roh- Werkst. 57 (1999) 191-202.
- Giebeler E., Dimensionsstabilisierung von Holz durch eine Feuchte/Wärme/Druck-Behandlung, Holz Roh- Werkst. 41 (1983) 87-94 [CrossRef].
- Goring D.A.I., Thermal softening of lignin, hemicelluloses and cellulose, Pulp Pap. Mag. Canada 64 (1963) T-517-527.
- Hillis W.E., High temperature and chemical effects on wood stability. Part 1. General considerations, Wood Sci. Technol. 18 (1984) 281-293 [CrossRef].
- Hillis W.E., Rozsa A.N., The softening temperatures of wood, Holzforschung 32 (1978) 69-73.
- Hillis W.E., Rozsa A.N., High temperature and chemical effects on wood stability. Part 2. The effect of heat on the softening of radiata pine, Wood Sci. Technol. 19 (1985) 57-66 [CrossRef].
- Ifju G., Tensile strength behaviour as a function of cellulose in wood, For. Prod. J. 14 (1964) 366-372.
- Kass A., Wangaard F.F., Schroeder H.A., Chemical degradation of wood: the relationship between strength retention and pentosan content, Wood fiber 2 (1970) 31-39.
- Kollmann F.F.P., Mechanics and rheology of wood, in: Kollmann F.F.P., Coté W.A. (Eds.), Principles of wood science and technology. I. Solid wood, Springer-Verlag, Berlin, Heidelberg, New York, 1968, pp. 292-414.
- Kollmann F., Fengel D., Änderungen der chemischen Zusamensetzung von Holz durch thermische Behandlung, Holz Roh- Werkst. 21 (1965) 77-85 [CrossRef].
- Kollmann F., Schneider A., Uber dass Sorptionsverhalten wärmebehandelter Hölzer, Holz Roh- Werkst. 41 (1963) 87-94.
- Kosíková B., Hricovini M., Cosetino C., Interaction of lignin and polysaccharides in beech wood (Fagus sylvatica) during drying processes, Wood Sci. Technol. 33 (1999) 373-380 [CrossRef].
- Kubojima Y., Okano T., Ohta M., Bending strength and toughness of heat treated wood, J. Wood Sci. 46 (2000) 8-15 [CrossRef].
- LeVan S.L., Ross R.J., Winandy J.E., Effects of fire retardant chemicals on bending properties of wood at elevated temperatures, Res. Pap. FPL-RP-498, 1990.
- Mark R.E., Cell wall mechanics of tracheids, Yale University Press, New Haven, CT, 1967.
- McKenzie W.M.C., Design of structural timber, MacMillan Press Ltd, 2000.
- Natterer J., Sandoz J.L., Rey M., Construction en bois. Materiau, technologie et dimensionnement, Traité de génie civil, Vol. 13, Presses polytechniques et universitaires Romandes, 2004.
- Noack D., Uber die Heisswasserbehandlung von Rotbuchenholz im Temperaturbereich von 100 bis 180 °C, Holzforsch. Holzverwert. 21 (1969) 118-124.
- Pizzi A., Stephanou A., Boonstra M.J., Pendlebury A.J., A new concept on the chemical modification of wood by organic anhydrides, Holzforschung 48 (Suppl.) (1994) 91-94.
- Pott G., Natural fibers with low moisture sensitivity, in: Natural fibers, plastics and composites, chapter 8, Kluwer Academic Publishers, 2004.
- Rowell R.M., Physical and mechanical properties of chemically modified wood, in: Hon D.N.-S. (Ed.), Chemical modification of lignocellulosic materials, M. Dekker, New York, 1996, pp. 295-310.
- Rousset P., Turner I., Donnot A., Perré P., Choix d'un modèle de pyrolyse ménagée du bois à l'échelle de la microparticule en vue de la modélisation macroscopique, Ann. For. Sci. 63 (2006) 213-229 [CrossRef] [EDP Sciences].
- Rusche H., Thermal degradation of wood at temperatures up to 200 °C. Part 1: Strength properties of dried wood after heat treatment, Holz Roh- Werkst. 31 (1973) 273-281 [CrossRef].
- Sanderman W., Augustin H., Chemical investigations on the thermal decomposition of wood, Part I: Stand of research, Holz Roh- Werkst. 21 (1963) 256-265 [CrossRef].
- Scheiding W., Kruse K., Plaschkies K., Weiss B., Thermally modified timber (TMT) for playground toys: Investigations on 13 industrially manufactured products, in: proc. 2nd European conference on Wood modification, Goettingen, Germany, October 2005.
- Seborg R.M., Tarkow H., Stamm A.J., Effect of heat upon the dimensional stabilisation of wood, J. For. Prod. Res. Soc. 3 (1953) 59-67.
- Shiraishi N., Wood plasticization, in: Hon D.N.-S., Shiraishi N. (Eds.) Wood and cellulosic chemistry, Marcel Dekker, Inc., New York, Basel, 2001, pp. 655-700.
- Sivonen H., Maunu S.L., Sundholm F., Jamsa S., Viitaniemi P., Magnetic resonance studies of thermally modified wood, Holzforschung 56 (2002) 648-654.
- Stamm A.J., Wood and cellulose science, Ronald Press Company, USA, 1964.
- Sweet M.S., Winandy J.E., The influence of degree of polymerisation (DP) of cellulose and hemicellulose on the strength loss of fire-retardant-treated wood, Holzforschung 53 (1999) 311-317.
- Tjeerdsma B.F., Militz H., Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood, Holz Roh- Werkst. 63 (2005) 102-111 [CrossRef].
- Tjeerdsma B.F., Boonstra M., Militz H., Thermal modification of non-durable wood species. Part 2. Improved wood properties of thermally treated wood, International Research Group on Wood Preservation, Document No. IRG/WP 98-40124, 1998.
- Tjeerdsma B.F., Boonstra M., Pizzi A., Tekely P., Militz H., Characterisation of thermally modified wood: molecular reasons for wood performance improvement, Holz Roh- Werkst. 56 (1998) 149-153 [CrossRef].
- Viitaniemi P., Jämsä S., Puun modifionti lampokassittelylla (Modification of wood with heat treatment), Espoo 1996, VTT Juskaisuja - Publikationer 814, 1996.
- Weiland J.J., Guyonnet R., Retifiziertes Holz. 16. Verdichter Holzbau in Europa. Motivation, Erfahrung, Entwicklung, in: Dreilander Holztagung. 10. Joanneum Research Fachtage, 2-5 11 1997, Grazer Congress, Grazz, Austria, 1997.
- Whistler R.L., Chen C.-C., Hemicelluloses, in: Lewin, Goldstein (Eds.), Wood structure and composition, International fiber science and technology series, Vol. 11, Marcel Decker, Inc., New York, NY, 1991, pp. 287-320.
- Winandy J.E., Effects of fire retardant treatments after 18 months of exposure at 150 °F (66 °C), Res. Note FPL-RN-0264, 1995.
- Winandy J.E., Effects of treatment, incising and drying on mechanical properties of wood, Gen. Tech. Rep. FPL-GTR 94: 371-378, 1996.
- Winandy J.E., Lebow P.K., Modelling strength loss in wood by chemical composition. Part I. An individual component model for southern pine, Wood fiber Sci. 33 (2001) 239-254.
- Winandy J.E., Rowell R.M., The chemistry of wood strength, in: Rowell R.M. (Ed.) The Chemistry of solid wood, American Chemical Society, Washington, DC, 1984, pp. 211-256.