The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
Denny Ohnesorge, Klaus Richter, Gero Becker
Ann. For. Sci., 67 6 (2010) 601
Published online: 2010-05-18
This article has been cited by the following article(s):
Integrity check of structural softwood glue lines: correspondence between delamination and block shear tests
René Steiger, Martin Arnold and Walter Risi
European Journal of Wood and Wood Products 72 (6) 735 (2014)
DOI: 10.1007/s00107-014-0838-0
See this article
Beech sawn timber for structural use: A case study for mechanical characterization and optimization of the Italian visual strength grading rule
D. Cibecchini, A. Cavalli, G. Goli and M. Togni
Journal of Forest Science 62 (11) 521 (2016)
DOI: 10.17221/93/2016-JFS
See this article
The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol–formaldehyde adhesive and liquefied wood
Ugovšek Aleš, Frederick A. Kamke, Milan Sernek, Matjaž Pavlič and Andreja Kutnar
European Journal of Wood and Wood Products 71 (3) 371 (2013)
DOI: 10.1007/s00107-013-0669-4
See this article
Measurement of moisture-related strain in bonded ash depending on adhesive type and glueline thickness
Markus Knorz, Peter Niemz and Jan-Willem van de Kuilen
Holzforschung 70 (2) 145 (2016)
DOI: 10.1515/hf-2014-0324
See this article
Characterization of wood-adhesive bonds in wet conditions by means
of nanoindentation and tensile shear strength
Stefan Bockel, S. Harling, P. Grönquist, P. Niemz, F. Pichelin, G. Weiland and Johannes Konnerth
European Journal of Wood and Wood Products 78 (3) 449 (2020)
DOI: 10.1007/s00107-020-01520-1
See this article
Structural bonding of ash (Fraxinus excelsior L.): resistance to delamination and performance in shearing tests
Markus Knorz, Michael Schmidt, Stefan Torno and Jan-Willem van de Kuilen
European Journal of Wood and Wood Products 72 (3) 297 (2014)
DOI: 10.1007/s00107-014-0778-8
See this article
Improvement of tensile shear strength and wood failure percentage of 1C PUR bonded wooden joints at wet stage by means of DMF priming
Oliver Kläusler, Philipp Hass, Carlos Amen, Sven Schlegel and Peter Niemz
European Journal of Wood and Wood Products 72 (3) 343 (2014)
DOI: 10.1007/s00107-014-0786-8
See this article
Feasibility of glued laminated timber beams with tropical hardwoods
D. Bourreau, Y. Aimene, J. Beauchêne and B. Thibaut
European Journal of Wood and Wood Products 71 (5) 653 (2013)
DOI: 10.1007/s00107-013-0721-4
See this article
Quality assessment of glued ash wood for construction engineering
Samuel Ammann, Sven Schlegel, Mario Beyer, et al.
European Journal of Wood and Wood Products 74 (1) 67 (2016)
DOI: 10.1007/s00107-015-0981-2
See this article
Significance of wood extractives for wood bonding
Edmone Roffael
Applied Microbiology and Biotechnology 100 (4) 1589 (2016)
DOI: 10.1007/s00253-015-7207-8
See this article
1C-PUR-bonded hardwoods for engineered wood products: influence of selected processing parameters
Jan Luedtke, Carlos Amen, Albrecht van Ofen and Christian Lehringer
European Journal of Wood and Wood Products 73 (2) 167 (2015)
DOI: 10.1007/s00107-014-0875-8
See this article
Bonding quality of industrially produced cross-laminated timber (CLT) as determined in delamination tests
Markus Knorz, Stefan Torno and Jan-Willem van de Kuilen
Construction and Building Materials 133 219 (2017)
DOI: 10.1016/j.conbuildmat.2016.12.057
See this article
Building Performance Analysis
Building Performance Analysis 503 (2018)
DOI: 10.1002/9781119341901.refs
See this article
Improvement of ash ( Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application
Gaspard Clerc, Martin Lehmann, Joseph Gabriel, et al.
International Journal of Adhesion and Adhesives 85 303 (2018)
DOI: 10.1016/j.ijadhadh.2018.06.017
See this article
Experimental investigation and prediction of bonding strength of Oriental beech (Fagus orientalis Lipsky) bonded with polyvinyl acetate adhesive
Sebahattin Tiryaki, Selahattin Bardak and Timuçin Bardak
Journal of Adhesion Science and Technology 29 (23) 2521 (2015)
DOI: 10.1080/01694243.2015.1072989
See this article
Structural products made of beech wood: quality assessment of the raw material
Michele Brunetti, Michela Nocetti, Benedetto Pizzo, et al.
European Journal of Wood and Wood Products 78 (5) 961 (2020)
DOI: 10.1007/s00107-020-01542-9
See this article
Hardwood rods glued into softwood using environmentally sustainable adhesives
Marvin Kaufmann, Jana Kolbe and Till Vallée
The Journal of Adhesion 94 (11) 991 (2018)
DOI: 10.1080/00218464.2017.1385459
See this article
Progress in Adhesion and Adhesives
Christopher G. Hunt, Charles R. Frihart, Manfred Dunky and Anti Rohumaa
Progress in Adhesion and Adhesives 353 (2019)
DOI: 10.1002/9781119625322.ch8
See this article
Bonding performance of Portuguese Maritime pine glued laminated timber
Carlos Martins, Alfredo M.P.G. Dias and Helena Cruz
Construction and Building Materials 223 520 (2019)
DOI: 10.1016/j.conbuildmat.2019.06.143
See this article
Comparison of different bonding parameters in the production of beech and combined beech-spruce CLT by standard and optimized tests methods
Michele Brunetti, Michela Nocetti, Benedetto Pizzo, Francesco Negro, Giovanni Aminti, Paolo Burato, Corrado Cremonini and Roberto Zanuttini
Construction and Building Materials 265 120168 (2020)
DOI: 10.1016/j.conbuildmat.2020.120168
See this article
Comparison of newly proposed test methods to evaluate the bonding quality of Cross-Laminated Timber (CLT) panels by means of experimental data and finite element (FE) analysis
Michele Betti, Michele Brunetti, Marco Pio Lauriola, et al.
Construction and Building Materials 125 952 (2016)
DOI: 10.1016/j.conbuildmat.2016.08.113
See this article
Optimization of bonding parameters of laminated wood using a novel bio-based RPF adhesive
Xueyong Ren, Yinlan Shen, Ying Gao, et al.
MATEC Web of Conferences 275 01025 (2019)
DOI: 10.1051/matecconf/201927501025
See this article
Bonding quality of cross-laminated timber: Evaluation of test methods on Eucalyptus grandis panels
Michael Dugmore, Michela Nocetti, Michele Brunetti, Zahra Naghizadeh and C. Brand Wessels
Construction and Building Materials 211 217 (2019)
DOI: 10.1016/j.conbuildmat.2019.03.240
See this article
Assessment of Bending Properties of Sawn and Glulam Blackwood in Portugal
Carlos Martins, Sandra Monteiro, Sofia Knapic and Alfredo Dias
Forests 11 (4) 418 (2020)
DOI: 10.3390/f11040418
See this article
Validation of visual and machine strength grading for Italian beech with additional sampling
M Brunetti, G Aminti, M Nocetti and G Russo
iForest - Biogeosciences and Forestry 14 (3) 260 (2021)
DOI: 10.3832/ifor3649-014
See this article
Monitoring of Beech Glued Laminated Timber and Delamination Resistance of Beech Finger-Joints in Varying Ambient Climates
Hannes Stolze, Mathias Schuh, Sebastian Kegel, Connor Fürkötter-Ziegenbein, Christian Brischke and Holger Militz
Forests 12 (12) 1672 (2021)
DOI: 10.3390/f12121672
See this article
Hydroxymethylated resorcinol (HMR) primer to improve the performance of wood-adhesive bonds – A review
Thomas Böger, Antoni Sanchez-Ferrer and Klaus Richter
International Journal of Adhesion and Adhesives 113 103070 (2022)
DOI: 10.1016/j.ijadhadh.2021.103070
See this article
Investigation of the Impact of Micro-Structuring on the Bonding Performance of Beechwood (Fagus Sylvatica L.)
Destin Bamokina Moanda, Martin Lehmann and Peter Niemz
Forests 13 (1) 113 (2022)
DOI: 10.3390/f13010113
See this article
Predicting the strength of European beech (Fagus sylvatica L.) boards using image-based local fibre direction data
Thomas Ehrhart, Pedro Palma, Mark Schubert, René Steiger and Andrea Frangi
Wood Science and Technology 56 (1) 123 (2022)
DOI: 10.1007/s00226-021-01347-w
See this article
Assessment of bonding durability of CLT and glulam made from oak and mixed poplar-oak according to bonding pressure and glue type
Citra Yanto Ciki Purba, Guillaume Pot, Robert Collet, Myriam Chaplain and Jean-Luc Coureau
Construction and Building Materials 335 127345 (2022)
DOI: 10.1016/j.conbuildmat.2022.127345
See this article
Selected previous findings on the factors influencing the gluing quality of solid wood products in timber construction and possible developments: A review
Andreas Hänsel, Jakub Sandak, Anna Sandak, Juana Mai and Peter Niemz
Wood Material Science & Engineering 17 (3) 230 (2022)
DOI: 10.1080/17480272.2021.1925963
See this article