Towards high cutting speed in wood milling
Ann. For. Sci., 59 8 (2002) 857-865
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
The Science and Engineering of Cutting
The Science and Engineering of Cutting 375 (2009)DOI: 10.1016/B978-0-7506-8531-3.00023-7
See this article
Effect of the Cutting Speed on the Surface Quality of Black Spruce Cants Produced by a Chipper-Canter
Roger E. Hernández, Svetka Kuljich, Oussema Naffeti and Ahmed KoubaaForest Products Journal 63 (1-2) 39 (2013)
DOI: 10.13073/FPJ-D-13-00016
See this article
Development of silicon nitride/silicon carbide composites for wood-cutting tools
F. Eblagon, B. Ehrle, T. Graule and J. KueblerJournal of the European Ceramic Society 27 (1) 419 (2007)
DOI: 10.1016/j.jeurceramsoc.2006.02.040
See this article
Determination of optimal machining parameters of massive wooden edge glued panels which is made of Scots pine (Pinus sylvestris L.) using Taguchi design method
Sait Dündar SofuogluEuropean Journal of Wood and Wood Products 75 (1) 33 (2017)
DOI: 10.1007/s00107-016-1028-z
See this article
Assessment of surface properties and solvent-borne coating performance of red oak wood produced by peripheral planing
Bruna Ugulino and Roger E. HernándezEuropean Journal of Wood and Wood Products 75 (4) 581 (2017)
DOI: 10.1007/s00107-016-1090-6
See this article
Injection molding of ceramic cutting tools for wood-based materials
F. Sommer, F. Kern and R. GadowJournal of the European Ceramic Society 33 (15-16) 3115 (2013)
DOI: 10.1016/j.jeurceramsoc.2013.05.012
See this article
Lifetime and Wear Behavior of Near Net Shaped Si3N4/SiC Wood Cutting Tools
Claudia Strehler, Bruno Ehrle, Andreas Weinreich, et al.International Journal of Applied Ceramic Technology 9 (2) 280 (2012)
DOI: 10.1111/j.1744-7402.2011.02690.x
See this article
Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
Rémy Marchal, Frédéric Mothe, Louis-Etienne Denaud, Bernard Thibaut and Laurent BleronHolzforschung 63 (2) 157 (2009)
DOI: 10.1515/HF.2009.014
See this article
Medium Density Fiberboard Machining and Wear Behavior of Injection-Molded Ceramic Composite Wood Cutting Tools
Frank Sommer, Dan Talpeanu, Frank Kern, Rainer Gadow and Uwe HeiselInternational Journal of Applied Ceramic Technology 12 (1) 147 (2015)
DOI: 10.1111/ijac.12144
See this article
Influence of sintering and sintering additives on the mechanical and microstructural characteristics of Si3N4/SiC wood cutting tools
C. Strehler, G. Blugan, B. Ehrle, et al.Journal of the European Ceramic Society 30 (10) 2109 (2010)
DOI: 10.1016/j.jeurceramsoc.2010.04.007
See this article
Lifetime and Wear Behavior of Near Net Shaped Si3 N4 /SiC Wood Cutting Tools
Claudia Strehler, Bruno Ehrle, Andreas Weinreich, et al.International Journal of Applied Ceramic Technology n/a (2011)
DOI: 10.1111/j.1744-7402.2011.00690.x
See this article
The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood
Xiaolei Guo, Zhaolong Zhu, Mats Ekevad, Xu Bao and Pingxiang CaoAdvances in Applied Ceramics 117 (1) 16 (2018)
DOI: 10.1080/17436753.2017.1368946
See this article
The influence of technical characteristics of wood milling tools on its wear performance
Regita Bendikiene and Gintaras KeturakisJournal of Wood Science 63 (6) 606 (2017)
DOI: 10.1007/s10086-017-1656-x
See this article
Performance of lightweight coated oxide ceramic composites for industrial high speed wood cutting tools: A step closer to market
Gurdial Blugan, Claudia Strehler, Marc Vetterli, et al.Ceramics International 43 (12) 8735 (2017)
DOI: 10.1016/j.ceramint.2017.04.005
See this article
Effect of CNC application parameters on wooden surface quality
Kücük Hüseyin Koc, Emine Seda Erdinler, Ender Hazir and Emel ÖztürkMeasurement 107 12 (2017)
DOI: 10.1016/j.measurement.2017.05.001
See this article
Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors
Ondrej Dvoracek, Daniel Lechowicz, Thomas Krenke, et al.The International Journal of Advanced Manufacturing Technology 113 (5-6) 1685 (2021)
DOI: 10.1007/s00170-021-06769-1
See this article
Development of Ceramic Composites for Industrial Wood-Cutting Tools
Jakob Kübler, Fernando Eblagon, Thomas Graule and Bruno EhrleKey Engineering Materials 368-372 1062 (2008)
DOI: 10.4028/www.scientific.net/KEM.368-372.1062
See this article
Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN
Krzysztof Szwajka, Joanna Zielińska-Szwajka and Tomasz TrzepiecinskiMaterials 12 (3) 386 (2019)
DOI: 10.3390/ma12030386
See this article
Surface quality measurement by contact and laser methods on thermally modified spruce wood after plain milling
Fatemeh Razaei, Milan Gaff, Anil Kumar Sethy, Peter Niemz, Gourav Kamboj, Gianluca Ditommaso, Roberto Corleto, Sumanta Das and Miroslav GašparíkThe International Journal of Advanced Manufacturing Technology 110 (5-6) 1653 (2020)
DOI: 10.1007/s00170-020-05983-7
See this article
Energy efficiency of rotary brush cutters
D V Furmanov, I S Tyuremnov and V S ChizhovIOP Conference Series: Materials Science and Engineering 971 052086 (2020)
DOI: 10.1088/1757-899X/971/5/052086
See this article
A review on wood machining: characterization, optimization, and monitoring of the sawing process
Vahid Nasir and Julie CoolWood Material Science & Engineering 15 (1) 1 (2020)
DOI: 10.1080/17480272.2018.1465465
See this article
Cutting forces and cutting quality in the up-milling of solid wood using ceramic cutting tools
Xiaolei Guo, Jinxin Wang, Dietrich Buck, Zhaolong Zhu and Mats EkevadThe International Journal of Advanced Manufacturing Technology 114 (5-6) 1575 (2021)
DOI: 10.1007/s00170-021-06991-x
See this article
Determination of Optimal Drilling Parameters of Massive Wooden Edge Glued Panels (EGP) and Medium Density Fiberboard using Taguchi Design Method
Emine Nur AKTAŞ and Sait Dündar SOFUOĞLUBilge International Journal of Science and Technology Research (2022)
DOI: 10.30516/bilgesci.1110376
See this article
FACTORS AFFECTING MECHANICS OF MACHINING IN WOOD AND WOOD-BASED MATERIALS
Ali CAKMAKTURKISH JOURNAL OF FOREST SCIENCE 629 (2022)
DOI: 10.32328/turkjforsci.1167080
See this article
Linear woodcutting of European beech: experiments and computations
Petr Kubík, František Šebek, Petr Krejčí, Martin Brabec, Jan Tippner, Ondřej Dvořáček, Daniel Lechowicz and Stephan FrybortWood Science and Technology 57 (1) 51 (2023)
DOI: 10.1007/s00226-022-01442-6
See this article