EDP Sciences logo
Search
Menu
All issues Volume 64 / No 5 (July-August 2007) Ann. For. Sci., 64 5 (2007) 569-575 References
Free Access
Issue
Ann. For. Sci.
Volume 64, Number 5, July-August 2007
Page(s) 569 - 575
DOI https://doi.org/10.1051/forest:2007034
Published online 17 July 2007
References of  Ann. For. Sci. 64 (2007) 569-575
  1. Bardet S., Beauchêne J., Thibaut B., Influence of basic density and temperature on mechanical properties perpendicular to the grain of ten wood tropical species, Ann. For. Sci. 60 (2003) 49-59 [CrossRef] [EDP Sciences].
  2. Butaud J.C., Décès-Petit C., Marchal R., An Experimental device for the study of wood cutting mechanisms: the Microlathe, Poster Session Proceedings of the 12th International Wood Machining Seminar, Kyoto, 2-4th Oct. 1995, pp. 479-485.
  3. Butterworth S., On the theory of filter amplifiers, Wirel. Eng. (Exp. Wirel. and the Radio Eng.) 7 (1930) 536-541.
  4. Decès-Petit C., Étude des phases transitoires au cours du déroulage de bois, Thèse de doctorat de l'École Nationale Supérieure d'Arts et Métiers, 1996, 120 p.
  5. Denaud L.E., Analyses vibratoires et acoustiques du déroulage, Thèse de doctorat de l'École Nationale Supérieure d'Arts et Métiers, 2006, 236 p.
  6. Djouadi M.A., Beer P., Marchal R., Sokolowska A., Lambertin M., Precht W., Nouveau C., Antiabrasive coatings: application for wood processing, Surf. Coat. Technol. 116-119 (1999) 508-516 [CrossRef].
  7. Eyma F., Méausoone P.J., Larricq P., Marchal R., Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values, Ann. For. Sci. 62 (2005), 441-447.
  8. Franz N.C., An analysis of the wood-cutting process, Univ. Michigan Press, Ann. Arbor. Mich., 1958.
  9. Kivimaa E., Cutting force in wood working, Helsinki, 1950.
  10. Lemaster R.L., Klamecki B.E., Dornfeld D.A., Analysis of acoustic emission in slow speed wood cutting, Wood Sci. 15 (1982) 150-160.
  11. Marchal R, Negri M., Rotary Cutting of high density wood: lathe-settings programmed variation to improve the transient phases crossing, Proceedings of the 13th International Wood Machining Seminar, Vancouver, 17-20th June 1997, pp. 547-559.
  12. Marchal R., Dai C., Wang B., La surveillance du déroulage par analyse acoustique et vibratoire : résultats préliminaires, 6$^{\rm e}$ Séminaire PPF Maîtrise globale du procédé d'enlèvement de matière et des techniques associées, ENSAM Metz, 23 Novembre 2000, pp. 34-44.
  13. Nagatomi K., Yoshida K., Banshoya K., Murase Y., Relation between veneer quality and peeling sound in peeling of sugi, Proceedings of the 14th International Wood Machining Seminar, Paris-Épinal-Cluny, 12-19th Sept. 1999, pp. 681-690.
  14. Thibaut B., Le processus de coupe du bois par déroulage, Thèse de doctorat d'État, Université des Sciences et Techniques du Languedoc, 1988, 386 p.
  15. Thibaut B., Beauchêne J, Links between wood machining phenomena and wood mechanical properties : The case of 0°/90° orthogonal cutting of green wood, Proceedings of the 2nd International Symposium on Wood Machining, Vienna, 5-7th July, 2004, pp. 149-160.