Online control of wood peeling process: Acoustical and vibratory measurements of lathe checks frequency
Ann. For. Sci., 64 5 (2007) 569-575
Published online: 2007-07-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
U-NET-based deep learning for automated detection of lathe checks in homogeneous wood veneers
Caroline Marc, Bertrand Marcon, Louis Denaud and Stéphane GirardonEuropean Journal of Wood and Wood Products 83 (2) (2025)
https://doi.org/10.1007/s00107-025-02208-0
Wood and plywood as eco-materials for sustainable mobility: A review
B. Castanié, A. Peignon, C. Marc, F. Eyma, A. Cantarel, J. Serra, R. Curti, H. Hadiji, L. Denaud, S. Girardon and B. MarconComposite Structures 329 117790 (2024)
https://doi.org/10.1016/j.compstruct.2023.117790
(2024)
https://doi.org/10.21203/rs.3.rs-4912190/v1
TECHNOLOGICAL PROCESS OF OBTAINING PEELED VENEER: THE INFLUENCE OF EXTERNAL TEMPERATURE CONDITIONS ON THE DEFROSTING AND WARMING UP OF WOOD
Egor Razinkov, Tatyana Ishchenko and Sergey TrofimovForestry Engineering Journal 12 (4) 141 (2023)
https://doi.org/10.34220/issn.2222-7962/2022.4/10
The Influence of Slicing Thickness on the Perpendicular to Grain Tensile Properties of Oak (Quercus robur L. and Quercus petraea L.) Lamellae
Victor Grubîi and Jimmy JohanssonApplied Sciences 13 (22) 12254 (2023)
https://doi.org/10.3390/app132212254
https://doi.org/10.15626/LUD.511.2023
An image processing algorithm for detection and analysis of slicing checks
Victor Grubîi and Jimmy JohanssonEuropean Journal of Wood and Wood Products 79 (4) 999 (2021)
https://doi.org/10.1007/s00107-021-01672-8
Veneer and plywood properties of yemane (Gmelina arborea Roxb.) from 3-, 5-, and 7-year-old plantation trees
Juanito P. Jimenez, Dennis M. Gilbero and Marina A. AliponInternational Wood Products Journal 12 (4) 277 (2021)
https://doi.org/10.1080/20426445.2021.1979823
Root cause and vibration analysis to increase veneer manufacturing process efficiency: a case study on an industrial peeling lathe
Víctor Tuninetti, Ricardo Alzugaray, Jorge González, Marian Valenzuela, Andrés Jaramillo and Eduardo DiezEuropean Journal of Wood and Wood Products 79 (4) 951 (2021)
https://doi.org/10.1007/s00107-021-01705-2
Use of computed tomography to determine penetration paths and the distribution of melamine resin in thermally-modified beech veneers after plasma treatment
Richard Wascher, Florian Bittner, Georg Avramidis, Martin Bellmann, Hans-Josef Endres, Holger Militz and Wolfgang ViölComposites Part A: Applied Science and Manufacturing 132 105821 (2020)
https://doi.org/10.1016/j.compositesa.2020.105821
Acceptability testing and development of a novel wood lathe balanced rest
Ernyl S. Onrejas, Jonathan O. Etcuban, Redjie D. Arcadio, et al.Archives of Mechanical Technology and Materials 39 (1) 59 (2019)
https://doi.org/10.2478/amtm-2019-0011
Physical properties and bonding quality of laminated veneer lumber produced with veneers peeled from small-diameter rubberwood logs
P. S. Khoo, K. L. Chin, P. S. H'ng, et al.Royal Society Open Science 6 (12) 191763 (2019)
https://doi.org/10.1098/rsos.191763
The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood
Citra Yanto Ciki Purba, Guillaume Pot, Joffrey Viguier, Julien Ruelle and Louis DenaudEuropean Journal of Wood and Wood Products 77 (3) 393 (2019)
https://doi.org/10.1007/s00107-019-01400-3
Lathe check development and properties: effect of log soaking temperature, compression rate, cutting radius and cutting speed during peeling process of European beech (Fagus sylvatica L.) veneer
Anti Rohumaa, Joffrey Viguier, Stéphane Girardon, Michael Krebs and Louis DenaudEuropean Journal of Wood and Wood Products 76 (6) 1653 (2018)
https://doi.org/10.1007/s00107-018-1341-9
Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses
Pui San Khoo, Paik San H’ng, Kit Ling Chin, et al.European Journal of Wood and Wood Products 76 (4) 1335 (2018)
https://doi.org/10.1007/s00107-018-1300-5
Wood machining with a focus on French research in the last 50 years
Bernard Thibaut, Louis Denaud, Robert Collet, Rémy Marchal, Jacques Beauchêne, Frédéric Mothe, Pierre-Jean Méausoone, Patrick Martin, Pierre Larricq and Florent EymaAnnals of Forest Science 73 (1) 163 (2016)
https://doi.org/10.1007/s13595-015-0460-2
Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging
Toni Antikainen, Joona Eskelinen, Anti Rohumaa, Teemu Vainio and Mark HughesWood Science and Technology 49 (3) 591 (2015)
https://doi.org/10.1007/s00226-015-0718-8
Numerical study of the influence of veneer lathe checks on the elastic mechanical properties of laminated veneer lumber (LVL) made of beech
Guillaume Pot, Louis-Etienne Denaud and Robert ColletHolzforschung 69 (3) 337 (2015)
https://doi.org/10.1515/hf-2014-0011
Recovery rate and quality of rotary peeled veneer from 30-year-old Pinus taeda L. logs
Mário Dobner JR., Leif Nutto and Antonio R. HigaAnnals of Forest Science 70 (4) 429 (2013)
https://doi.org/10.1007/s13595-013-0274-z
Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency
Louis Etienne Denaud, Laurent Bléron, Florent Eyma and Rémy MarchalEuropean Journal of Wood and Wood Products 70 (1-3) 253 (2012)
https://doi.org/10.1007/s00107-011-0549-8
A Method of Lathe Checks Measurement; SMOF device and its software
Bartosz Pałubicki, Rémy Marchal, Jean-Claude Butaud, et al.European Journal of Wood and Wood Products 68 (2) 151 (2010)
https://doi.org/10.1007/s00107-009-0360-y
Properties of wood surfaces – characterisation and measurement. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
Gerhard Sinn, Jakub Sandak and Tahiana RamananantoandroHolzforschung 63 (2) 196 (2009)
https://doi.org/10.1515/HF.2009.016
Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
Rémy Marchal, Frédéric Mothe, Louis-Etienne Denaud, Bernard Thibaut and Laurent BleronHolzforschung 63 (2) 157 (2009)
https://doi.org/10.1515/HF.2009.014