Free Access
Ann. For. Sci.
Volume 67, Number 7, October-November 2010
Article Number 704
Number of page(s) 7
Published online 19 August 2010
  • AFNOR, 1994. NF EN 350-1, Durabilité du bois et des matériaux dérivés du bois – Durabilité naturelle du bois massif – Partie 1 : Guide des principes d’essai et de classification de la durabilité naturelle du bois. Association Française de Normalisation, La Plaine Saint-Denis, 20 p. [Google Scholar]
  • AFNOR, 1996. NF EN 113, Produits de préservation du bois – Méthode d’essai pour déterminer l’efficacité protectrice vis-à-vis des champignons basidiomycètes lignivores – Détermination du seuil d’efficacité. Association Française de Normalisation, La Plaine Saint-Denis, 32 p. [Google Scholar]
  • ASTM-E399, 1990. Standard test method for plane-stain fracture toughness of metallic materials. ASTM International, West Conshohocken, PA, 33 p. [Google Scholar]
  • Bažant Z.P. and Planas J., 1998. Fracture and size effect in concrete and other quasibrittle materials, CRC Press, Boca Raton, Florida, 640 p. [Google Scholar]
  • Boatright S.W.J., and Garrett G.G., 1983. The effect of microstructure and stress state on the fracture behaviour of wood. J. Mater. Sci. 18: 2181–2199. [CrossRef] [Google Scholar]
  • Cartwright K.S.G., Campbell W.G., and Armstrong F.H., 1936. The influence of fungal decay on the properties of timber. I. The effect of progressive decay by Polyporus hispidus, Fr., on the strength of english ash (Fraxinus excelsior, L.). Biol. Sci. 120: 76–95. [CrossRef] [Google Scholar]
  • Castéra P., Nepveu G., and Chantre G., 1999. Principaux facteurs de contrôle de la variabilité du bois chez le pin maritime (Pinus pinaster Ait.). In: 5e colloque ARBORA : Propriétés et usages du pin maritime, ARBORA, Bordeaux, pp. 91–101. [Google Scholar]
  • Clausen C.A., and Kartal S.N., 2003. Accelerated detection of brown-rot decay: Comparison of soil block test, chemical analysis, mechanical properties, and immunodetection. For. Prod. J. 53: 90–94. [Google Scholar]
  • Clausen C.A., and Yang V., 2007. Protecting wood from mould, decay, and termites with multi-component biocide systems. Int. Biodeter. Biodegr. 59: 20–24. [CrossRef] [Google Scholar]
  • Donaldson L.A., 1992. Lignin distribution during latewood formation in Pinus radiata D. Don. IAWA Bull. 13: 381–387. [Google Scholar]
  • Gui Y.Q., Nicholas D.D., and Crawford D., 1996. A miniature mechanical apparatus and test protocol for bending and crushing tests in wood preservation research. For. Prod. J. 46: 77–80. [Google Scholar]
  • Humar M., Bucar B., and Pohleven F., 2006. Brown-rot decay of copper-impregnated wood. Int. Biodeter. Biodegr. 58: 9–14. [CrossRef] [Google Scholar]
  • Irbe I., Andersons B., Chirkova J., Kallavus U., Andersone I., and Faix O., 2006. On the changes of pinewood (Pinus sylvestris L.) Chemical composition and ultrastructure during the attack by brown-rot fungi Poria placenta and Coniophora puteana. Int. Biodeter. Biodegr. 57: 99–106. [CrossRef] [Google Scholar]
  • Knapic S., and Pereira H., 2005. Within-tree variation of heartwood and ring width in maritime pine (Pinus pinaster Ait.). For. Ecol. Manage. 210: 81–89. [CrossRef] [Google Scholar]
  • Machado J.S., and Cruz H.P., 2005. Within stem variation of maritime pine timber mechanical properties. Holz Roh Werkst. 63: 154-159. [CrossRef] [Google Scholar]
  • Morel S., Dourado N., Valentin G., and Morais J., 2005. Wood: a quasi brittle material, R-curve behavior and peak load evaluation. Int. J. Fract. 131: 385–400. [CrossRef] [Google Scholar]
  • Nepveu G., 1994. Variabilité. In: Jodin P. (Ed.), Le Bois, Matériau d’Ingénierie, ARBOLOR, Nancy, pp. 127–182. [Google Scholar]
  • Plomion C., Leprovost G., and Stokes A., 2001. Wood formation in trees. Plant Physiol. 127: 1513–1523. [CrossRef] [PubMed] [Google Scholar]
  • Pot D., Chantre G., Rozenberg P., Rodrigues J.C., Jones G.L., Pereira H., Hannrup B., Cahalan C., and Plomion C., 2002. Genetic control of pulp and timber properties in maritime pine (Pinus pinaster Ait.). Ann. For. Sci. 59: 563–575. [CrossRef] [EDP Sciences] [Google Scholar]
  • Przewloka S.R., 2004. Comparison of rapid decay testing methodologies for the screening of new wood preservatives. PG04-5015, Forest and Wood Products Research and Development Corporation, Denis M Cullity Research Fellowship Report, 88 p. [Google Scholar]
  • Reiterer A., and Sinn G., 2002. Fracture behaviour of modified spruce wood: a study using linear and non linear fracture mechanics. Holzforschung 56: 191–198. [CrossRef] [Google Scholar]
  • Ritschkoff A.-C., 1996. Decay mechanisms of brown-rot fungi. VTT Publications No. 268, Technical Research Centre of Finland, Espoo, 105 p. [Google Scholar]
  • Schniewind A.P., and Centeno J.C., 1973. Fracture toughness and duration of load factor I. Wood Fiber Sci. 5: 152–159. [Google Scholar]
  • Stanzl-Tschegg S.E., Tschegg E.K., and Teischinger A., 1994. Fracture energy of spruce wood after different drying procedures. Wood Fiber Sci. 26: 467–478. [Google Scholar]
  • Stanzl-Tschegg S.E., Tan D.M., and Tschegg E.K., 1996. Fracture resistance to the crack propagation in wood. Int. J. Fract. 75: 347–356. [CrossRef] [Google Scholar]
  • Winandy J.E., and Morrell J.J., 1993. Relationship between incipient decay, strength, and chemical composition of Douglas-fir heartwood. Wood Fiber Sci. 25: 278–288. [Google Scholar]
  • Winandy J.E., Clausen C.A., and Curling S.F., 2000. Predicting the effects of decay on wood properties and modeling residual service-life. In: Proc. 2nd annual conference on durability and disaster mitigation in wood-frame housing, Forest Products Society, Madison, WI, pp. 261–263. [Google Scholar]
  • Winandy J.E., and Lebow P., 2001. Modeling Strength Loss in Wood by Chemical Composition. Part I. an Individual Component Model for Southern Pine. Wood Fiber Sci. 33: 239–254. [Google Scholar]
  • Woessner P., 2008. Influence d’un traitement thermique sur la résistance mécanique du bois de pin. M.S. thesis, Université Bordeaux 1, Bordeaux, 126 p. [Google Scholar]
  • Zabel R.A. and Morrell J.J., 1992. Wood microbiology. Decay and its prevention, San Diego, New York, 476 p. [Google Scholar]