Issue |
Ann. For. Sci.
Volume 66, Number 3, April-May 2009
|
|
---|---|---|
Article Number | 302 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/forest/2009007 | |
Published online | 07 April 2009 |
DOI: 10.1051/forest/2009007
Preliminary study on the assessment of deadwood volume by the French national forest inventory
Rémi Teissier du Cros and Sandra LopezInventaire forestier national, Échelon de Bordeaux, 62 rue de Laseppe, 33000 Bordeaux, France
Received 18 October 2008; accepted 23 January 2009; published online 7 April 2009
Abstract
• As the French national forest
inventory does not currently monitor the lying compartment of the forest
deadwood, the figures obtained on this topic are therefore partial. This
study provides cost estimates and guidelines for assessing stumps, and
standing and lying deadwood.
• Comparisons were made between a fixed-area
sampling method and a line-intersect one. LIS was judged more
time-efficient, especially in dense understorey. Computer simulations were
performed in order to estimate the gain in precision with increasing
transect lengths. The results showed a continuous improvement in precision
associated with increases in transect length. The longest transect tested
(50 m) still had a large coefficient of variation, suggesting that
improvement in precision at the plot level could still be gained with longer
transects.
• Therefore, from a practical standpoint in terms of fieldwork,
we suggest that on a national scale lying deadwood should be measured by
line-intersect sampling, whereas stumps, standing dead trees and snags can
be monitored using standard fixed-area plots. To meet needs at the national
level, we consider that local imprecision could be compensated for by the
large number of plots measured each year.
Résumé - Étude préliminaire de l'évaluation du
volume de bois mort à l'Inventaire forestier national français.
• L'inventaire forestier national français ne réalise pas l'inventaire
du bois mort au sol, les résultats à ce sujet sont donc partiels.
Cette étude donne des orientations en termes de coûts et de
méthode pour l'échantillonnage des souches, arbres morts debout et
le bois mort au sol.
• Les méthodes d'inventaire par placette à
surface fixe et échantillonnage linéaire ont été
comparées. L'échantillonnage linéaire a été jugé
plus rapide surtout lorsque le sous-bois est dense. Des simulations ont
été réalisées pour estimer le gain de précision avec
l'augmentation de la longueur de transect. Les résultats ont montré
une amélioration continue de la précision associée à
l'augmentation de la longueur de transect. Le transect le plus long
testé (50 m) a toujours un coefficient de variation élevé ; ce
qui suggère que l'amélioration de la précision à
l'échelle du point peu être obtenue avec un transect plus long.
• Du point de vue pratique au niveau du travail de terrain, nous suggérons
qu'à l'échelle nationale le bois mort au sol soit mesuré par
transect alors que les souches, arbres morts debout et chandelles soit
mesurées avec la méthode standard des placettes fixes. Afin de
satisfaire aux besoins de l'échelle nationale, nous avons
considéré que l'imprécision locale peut être compensée
par le nombre important de points mesurés chaque année.
Key words: deadwood / line-intersect sampling / fixed-area sampling / national forest inventory
Mots clés : bois mort / échantillonnage linéaire / échantillonnage par placette à surface fixe / inventaire forestier national
Corresponding author: teissierducros@gmail.fr
© INRA, EDP Sciences 2009